Item Descriptions:

Craft tool Precision pin vise hand drill Retractable retractable With drill 0.8 mm to 3.0 mm Total 10 pcs set

【How to install the drill】

In the main body, the cap part and the central part are in the shape of a screw, and when you let me out, each collect chuck is included.

Insert the drill in the center of the cross slit, turn it in the direction occupying the cap and install.

If the cross slit opens too much, it will be difficult to center the center.

Please be careful.

Please be careful not to cut your fingers etc. when inserting / removing the drill.

※ Note: When attaching the tip cap to the center part

Wider screw threads

Please attach it to the other side, as the drill will idle.

The smallest drill

About → Chuck with the smallest opening can be tightened until the slit is sealed,

If you put your strength and tighten it tightly

The smallest drill can be held without problem, so let's tighten it tightly.

Craft tool Precision pin vise hand drill Retractable retractable With drill 0.8 mm to 3.0 mm Total 10 pcs set

【How to use】

Make sure your head hits the palm of your hand and apply force vertically and turn it.

By rotating the head, you can use it stably.

* If you apply force vertically, it will cause the work to be put on or become injured.

Please be careful.

※ Some fragments may fly.

For protection, we recommend that you use eyeglasses etc.

Craft tool Precision pin vise hand drill Retractable retractable With drill 0.8mm ~ 3.0mm Total 10 pieces set

* It is already inspected that all 10 drills will enter, inspected inside the storage case because the drill (especially the smallest drill in particular) moves well in the storage case due to shaking during transport

Thank you.

If there are any missing items or any other problem, please do not hesitate to contact us, so we will respond promptly, so thank you.

Features:

• It is a drill set for drilling pin insert.
• (It can also be used for punching holes in a work made of resin (transparent resin), craft work such as foundation production, plastic model, bead work and so on.)
• Two chucks are housed in the main body: Two double-headed chucks are stored in the main body, and it is possible to change the chuck according to the tip to be used.
• Drill blade size: 0.8 mm, 1 mm, 1.2 mm, 1.5 mm, 1.8 mm, 2 mm, 2.2 mm, 2.5 mm, 2.8 mm, 3 mm.
• Material: Steel (Please do not use for hard things like metal or stone.)
• How to use: Hold the head against the palm of your hand and turn it with vertical force.
• By rotating the head, you can use it stably.
• Includes: Storage type pin vise × 1, drill × 10 (with case)

Product information:

Shipping Weight: 18 g

Package Dimensions: 1.02 x 6.60 x 9.40 cm