*Please view with either desktop or laptop as I realised that if you view with mobile phone it make a very big diff.

LSD screen size	HD display
camera	HD pixel and wide angle lens
Video resolution	19201080P~25fps 1280720P~25fps
Photo resolution	1M ~ 8M
Picture format	JPG
Type of storage card	TF card
Storage card capacity	Maximum support 32G
TV-IN port	TV-IN 3.5mm
USB port	USB2.0 5P
Frequency	50HZ/60HZ
Battery	3.7V Pdymer Litlcium battery
MICS/Speaker	Support
Language	Chinese、English、Russian，Japanese，Korean

G1000 C Specification

Display screen	4.3 inch HD screen
Lens	AR0330 Sensor + 650NM Lens
Angle	120 degree
Minimum illuminance	1Lux
Video method	Circle recording/ Motion detection
Video format	MOV
Video code method	H.264
Video resolution	1920x1080P(30 F/S) /1280×720/848x480/640×480 (60 F/S)
Image resolution	4032×3024, 3648×2736, 3264×2448, 2592×1944, 2048×1536, 1920×1080, 1280×960, 640×480
AV OUT	AVOUT
AV format	PAL/NTSC
Seamless video	Yes
Video automatically recording by Power on	Support
G-sensor	When the car bumped, the video will be saved automatically, it won’t be deleted or covered by circle recording
Hand locking	Shortly press the ON/OFF button when recording to lock the file to avoid deleting
Language	Russian、Japanese、French、Italian、Germany、Spanish、Portuguese、English、Chinese、Korean
Video time	1 minute/3minutes/5minutes /10 minutes optional
Recording	Build-in Microphone, choose recording off or on
Version number	Display the version number and published time of the software
Night version	No infrared light
Memory card	TF card
Capacity of memory card	2GB--32GB
USB port	Mini5Pin USB2.0
Operation system	Windows 2000,windows xp, windows 7 ext.
Battery	3.7VP polymer battery
Consumption	Stand by 500-550 MAH Recording Video 600-650 MAH
Power	Device power supply 5V/2A
Stock temp	-10℃～70℃
Operate temp	-10℃～60℃

*Please note that Dual camera G35 can also act as an reverse camera when engaging reverse gear.

1) Identify which one of your car's fuse providing constant power. Most of the car radio fuse port is providing constant power and you might want to connect to that.

2) Once identified, connect the negative wire (Black color wire) to the GROUND which in this case is the screw that screw to your car side. Please remember that ground must be in contact to the metal part.

3) Connect the positive cable (Red color wire) to the fuse port which provide constant power.

4) with above steps, you are done with 24 hours in dash camera recording. For better understanding, I will appreciate that you take some time to watch the video clip below. Please note that you might need to cut away the end of the red cable in order to slot into the fuse port.