Studio : LUCKYFINE

Publisher : LUCKYFINE

Binding : Misc.

Product Description
Description:
Rate voltage: AC110V-240V
Rate Frequency: 50/60Hz
Rate Power: 180W

Before use:
1.Remove the water container to direction of arrow in same level, put the water into it to the highest water level.
2.Install the water container well, make sure that it's the stable installation.
First use:
1.Connection the power, long press the "Power Switch" to start the steam brush, the LCD will automatically start.
2.Choose the temperature which suitable for your hair. The default temperature is 150¡æ, ? please press the button " " and button "-" to control the temperature.
Operation instructions:
The brush need 90s to heat.
When the brush's temperature rises, the display light will flash. When the temperature meet requirement, the light will not flash.
The steam brush will come into the locking mode after choosing the temperature.
There are 5 temperatures to choose: 150¡æ, 170¡æ, 190¡æ, 210¡æ, 230¡æ.If you want to change to Fahrenheit temperature(¨H), firstly, press this steam button for few seconds to be unlocked. Then press about 3 seconds, it will be changed automatically: 300¨H, 340¨H, 375¨H, 410¨H, 450¨H.
You must close the steam brush by hands at the first using time.
If?you?don't?use?the?steam?brush?for?1?hours,?it?will?into?shutdown?mode.?You?can?long?press?the"POWER?SWITCH"to?start?it.

Notice:
Back board of steam brush is getting more and more higher temperature when using, please keep skin away from the brush, avoid the wire close to the heater part of brush.
Do not use the brush beside the bathtub, shower head, washing basin and other container filled with water.
Please unplug the power when you clean , repair and after using it, and if steam brush has something wrong, you should also power it down.
Don't put the brush into water.
Don't clean the brush with the rough thing.

Package Included:
1 x Hair Brush

0