Introduction:

Application: widely used in electro-optical sources， research teaching， metallurgy building， industry inspection as well as agriculture researching and illumination control.

Main measurements:

Current illuminance and temperature

Illuminance difference

Maximum illuminance and temperature

Minimum illuminance and temperature

Integrating illuminance

Average integrating illuminance

Highlights:

1. Powerful measurement functions: It can measure not only current values， maximums， and minimums of illuminance and temperature， but also illuminance difference， integrating illuminance， and average integrating illuminance.

2. Support for automatic storage of illuminance data (up to 1900 groups) and manual storage of illuminance data (up to 60 groups).

3. Wide measuring range (0 to 200，000 lux) and support of automatic range shift.

4. Delivered with computer-based analysis software， allowing users to operate the meter with ease.

5. Quick response， high portability， and operable by a single hand.

6. The sensor can be rotated.

7. Backlight.

Other functions:

1. Auto shutdown

2. Backlight and data hold

3. Optional units for illuminance and temperature

4. Auto shutdown setting

5. Auto data storage setting

6. Deletion of integrating illuminance data

Specifications:

Measurable objects: Illuminance and temperature， illuminance difference， maximum and minimum illuminance and temperature， integrating illuminance and integrating time， and average integrating illuminance

Photoelectric element: Silicon diode

Illuminance measuring range:

Total measuring range: 0-200， 000 Lux，

Lux， into four ranges

x1: 0-199. 9 Lux

x10: 200-1999. 9Lux

x100: 2000-19999. 9Lux

x1000: 20000-200000Lux

Temperature measuring range: 0-40C

Illuminance accuracy: +-3%rdg (below 10000 Lux); +-4%rdg (above 10000 Lux)

Temperature accuracy: +-1. 0 C

Units of illuminance and temperature:

Four combinations of units are available.

Lux/C

Lux/F

FC/C

FC/F

Illumination data storage: Automatic: Up to 1900 groups of data can be stored. LuxLAB is used to set the storage cycle and whether to start or stop storage.

Manual: Up to 60 groups of data can be stored. Whether to store is determined manually.

LCD display update frequency: twice per second

Operating temperature/humidity: 0-40C， 10-90% RH

Storage temperature/humidity: - 20-50C， 10-90% RH

Power supply: 2pcs AAA batteries (Not Included)

Battery life: 10 hours (continuous operation with a USB connection)

Auto shutdown: You can set an auto shutdown timer through LuxLAB.

Accessories: USB cable， CD， manual， case.