PRODUCT OVERVIEW: battery desulfator, battery regenerator, battery rejuverator

Batteries often fail because “sulfates” slowly develop and cover the battery plates. This sulfating process also weakens the electrolyte and this combined with the gradual coating of the plates slowly and almost imperceptibly reduces the battery’s ability to receive, store and then deliver power. This sulfating process gradually impairs battery function and causes a capacity loss until the battery can no longer perform the desired task and so the battery is deemed to have “failed”. However using an Auto Pulse Battery Desulfator can reverse the process by dissolving the sulfates, cleaning the plates and restoring the electrolyte strength so improving a battery’s life and capacity for an extended period. The Auto Pulse Battery Desulfator/Rejuvenator/Recovery unit uses no external power and generates a high-frequency pulse to dissolve batteries

“sulfates”.

FUNCTION

The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength regaining the batteries ability to receive charging current and deliver discharge current.

ADVANCED TECHNOLOGY

Many desulfator products use an old technology inductor design to generate the pulse to desulfate a battery. This old technology creates a harsh inductor peak that can be damaging to the battery plates. Utilising our new capacity pulsing method a “soft” peak is generated so dissolving sulfates without damaging the battery plates.

Old technology also requires a large inductor so necessitating a physically large desulfator device whereas using our advanced technology design the Auto Pulse Desulfator device is very compact yet provides BIG performance.

NEW CYCLIC PULSING FUNCTION

In a similar manner to a Pulse battery charger (charge – rest –charge –rest etc) a cyclic desulfating pulse function (pulse – rest – pulse – rest etc) optimizes a batteries recovery process. This method of desulfation has been implemented in the new Auto Pulse Desulfator

AUTO PULSE DESULFATOR BENEFITS:

Increases Battery Power
Extends Battery Life
Battery Charge Faster
Longer Discharge
Prevents Sulfate Build-up
Reduces Evaporation

COMPETITIVE ADVANTAGES

Fully Automatic voltage selection. 12V 24V 36V and 48V

New Cyclic pulse generation method for improved capacity recovery

“Soft” Peak Pulsing

Auto cutoff function to prevent over discharge of battery

User Configurable override for manual voltage selection:

USAGE METHOD

Just Red terminal connect to battery positive and black terminal to battery negative. And Auto Pulse

Battery Desulfator can cutoff when battery’s voltage is low.

If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage.

In this instance it is possible to manually set the desired operating voltage. By pressing the voltage

select button. The LED screen will first display the working voltage and if you want to then alter the

working voltage setting just presses the key again and the unit will change to next value. After setting

the desired voltage the display will switch off to conserve battery power.

CUTOFF VOLTAGE

Display Cut off voltage

12V Battery C12 11.0V

24V Battery C24 22.0V

36V Battery C36 33.0V

48V Battery C48 44.0V

Remarks: this battery desulfator is suitable for battery capacity below and around 200AH.

Our battery desulfator can only revive batteries which are not internally damaged, so if pls make sure your battery is not internally damaged before reviving!

BENEFITS & FEATURES:

Auto-setting for 12-48V battery
Working Amp: 20mA max
Peak Amp: 2A max
Peak Voltage: 60-100V
Pulse Frequency: 10,000HZ
LED light indicates when pulse working
Cutoff amp:
Weight: 150g, including inner package