Canon EF-S 18-55mm f / 3.5-5.6 IS STM Lens Hood
Compatible models: Canon EW-63C
Applicable models: Canon EF-S 18-55mm f / 3.5-5.6 IS STM
Hood diameter: 58MM
Material: ABS green plastic
Hood is set in the camera lens in front of the common photography accessories. It has the following effects:
1. In the backlight, side light or flash photography, to prevent the non-imaging light to enter, to avoid haze.
2. In the light and side light photography, you can avoid the surrounding scattered light into the lens.
3 light photography or night photography, you can avoid the surrounding interference light into the lens.
4. To prevent accidental damage to the lens, but also to avoid finger contact with the lens surface, but also to some extent for the lens to cover the sand, rain and snow.
Hood is widely used in backlight photography, in general, to avoid glare. However, glare may still occur if the light source is at a short distance. At this point, you can manually block the light shield on the light source side. Whether to eliminate the glare, to observe clearly from the viewfinder
Its role has the following points:
1. In the backlight, side light or flash photography, to prevent the non-imaging light to enter, to avoid haze.
2. In the light and side light photography, you can avoid the surrounding scattered light into the lens.
3. In the light photography or night photography, you can avoid the surrounding interference light into the lens.
4. To prevent accidental damage to the lens, but also to avoid finger contact with the lens surface, but also to some extent for the lens to cover the sand, rain and snow.