Introduction

ECG100G is a kind of single channel electrocardiograph, which features in  printing ECG waveform with thermal printing system, prompting for "Lead  off"
or "Lack of paper", multi-language interface, recording ECG  waveform with manual or auto mode, convenient to operate.

Features
1)Operation

• 2.7" STN-LCD, accurate and clear ECG waveform and working state display, economical to save recording paper.
• Touch keyboard, simple and convenient to operate.

2)Functions

• Adopt digital signal processing technology to get high-quality ECG waveforms  via AC filter, baseline filter and EMG filter of ECG signal.
• Real-time record single-channel ECG waveform and annotation(including lead mark,  sensitivity, paper speed and filter state, etc.).
• Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz.
• In AUTO mode, finish all operation by pressing the button once, which improves work efficiency.
• Multi-language (Chinese, English, French, Italian, Turkish, Spanish and German) interface and report.

3)Power supply

• AC/DC, built-in rechargeable lithium battery.
• In optimal DC state, up to 7h standby time, continuous print up to 4h, record up to 160 ECG waveform.

Parameters

• Working environment

　　　　Temperature: 5℃~40℃
　　　　Relative humidity: 25%~80%(non-condensing)
　　　　Atmospheric pressure: 700hPa~1060hPa

• Transport and storage environment

　　　　Temperature: -40℃~+55℃
　　　　Relative humidity: ≤95%
　　　　Atmospheric pressure: 500hPa~1060hPa

• Input mode: floating and defibrillation protection
• Frequency response: 0.05Hz ~ 150Hz(-3dB~+0.4dB)
• CMRR: >60dB, >100dB(add filter)
• Time constant:≥ 3.2s
• Patient leak current: <10µA
• Calibration voltage: 1mV
• Sensitivity: 5, 10, 20 mm/mV ±5%, standard sensitivity: 10mm/mV±2%
• Noise level: ≤15µVp-p
• Input circuit current: ≤50nA
• Input impedance: ≥50MΩ
• Sampling accuracy: 12-bit
• Safety classification: class Ⅰ, type CF and defibrillation-proof applied part
• Recording mode: thermal printing system
• Paper size: 50mm(W)×20m(L)
• Sampling frequency: 800Hz
• Polarizing voltage: ±300mV
• EMG interference filter: 35Hz(-3dB)
• AC filter: 50Hz/60Hz(-20dB)
• Paper speed: 25, 50mm/s,±5%
• Power supply:

　　　　AC: 100V~240V(50/60Hz)
　　　　DC: 7.4V/2000mAh rechargeable lithium battery

• Fuse specification: two AC time lag fuse(φ5×20mm), T1.6AL250V
• Waterproof degree: IPX0
• Working mode: continuous working
• Dimension: 315mm(L)×215mm(W)×77mm(H)
• Weight: 1.5Kg

Accessories

• A lead cable
• A limb electrode
• A chest electrode
• A thermal recording paper
• A power cord
• An earth wire
• A user manual

Optional:

• Bag
• Conductive gel

Qualification Certificate

CE, FDA