Model
AR-DFZ-1000
Image Sensor
1/3-inch Sony CCD
Horizontal resolution
1000 TV Lines
Min lllumination  0 LUX(IR ON)
Gamma  0.45
Electrontic Shutter
PAL:1/50~1/100(Second)
Synchronous System
Internal
Backlight Compensation
Auto
IR LED
2 Array strong light LED
IR distance  2-50M
Len
Standard 6mm(4/6/8/12/16mm Optional)
Waterproof Level  IP66
White Balance
Auto
S/N Ratio
≥48dB(AGC OFF)
Video output
1.0Vp-p 75Ω
Operating Temperature
-20 to +60 RH95% Max
Power Supply
DC12V±10%/1200mA
Weight  700g(with watershell)
Installation Notes:
(1) Do not use this product falls on the ground or by strong percussion;
(2) unless instructed otherwise， do not dismantle the machine;
(3) before use to determine whether the specified power supply voltage;
(4) to avoid targeting light (such as sunlight， lighting， etc.)， otherwise easily lead to too bright or pull light phenomena (this is not a failure)， will also affect the CCD life;
(5) Avoid wet conditions， dust， extreme heat， extreme cold， strong electromagnetic radiation and other venues;
(6) If abnormal， please unplug the power and with the local dealer.
(7) should be close to ground lightning ground.
Installation and operating instructions:
(1) first determine whether the correct supply voltage: DC12V， being outside in the negative.
(2) with a 75Ω coaxial cable to transmit video signals to the monitoring equipment.
(3) the appropriate choice of location of the camera fixed.
(4) connected to the power and adjust the camera angle to the target location into view.
System configuration list:
(1) a Camera
(2) a English Manual;