One with a transparent transfer film paste method small car stickers (dry paste method):
   Tools: rag， scraper or credit card
   1， clean body， keep dry.
   2， to determine the need to paste a good position. Under normal circumstances， the side stick slowly， while tools evenness， while Jiedi paper.
   3， if the graphics really do not， but also the transparent transfer film and the sticker tear paste. But must be careful not an accident adhesion.
   4， good paste， and then repeated scraping pressure several times. Off the transparent transfer film.
   5， the doors and sewn with a draw knife knife， inward package obedient.
   6. Do not let the car stickers and body of any separation or protrusions.
Paste method two， with a large car stickers transparent transfer film (wet paste method):
   Tools: rags， watering containers， scraper or credit card
   1， clean body， the body parts will be posted on the uniformity of sprinkler - to reduce the sticker viscosity， easy to adjust the position.
   2， to determine the need to paste a good position. Side stick slowly while gently tools evenness， while Jiedi paper.
   3， face the door handle or rub the material shall be cut and pack into the circumstances.
   4， appropriate adjustments， after determining the correct location of the graphics in general， the force repeatedly scrape off the water and bubbles. Off the transparent transfer film.
   5， the doors and sewn with a draw knife knife， inward package obedient.
   6. Do not let the car stickers and body of any separation or protrusions.
   7， try to make car stickers in the water dry， dry conditions can moderate heating. Depending on the weather conditions， and then a day or two after washing.