EAGTAC M25L3C2 6*XP-G2 S2 Led 3500 Lumens LED Flashlight 

We are Authorised Dealer for 



 

Technical Specifications

Dimensions

Head Dia.: 2.5 inches (62 mm)
Body Dia.: 1.8 inches (45.5 mm)
Length: 5.6 inches (141 mm)
Weight:  11.6 ounces (330 grams)1

Battery Type

3x18650 or 6xCR123A2
Compatible battery (diameter/length)
123A: (16-16.8mm/34-34.5mm)
18650: (18-18.8mm/67-68.5mm)

Read precaution with li-ion batteries.
See other battery type runtime

Operating voltage

5.4V - 19V
All batteries are connected in series. Do not exceed 19V. Do not use six 3.7V RCR123A.

What's included


MX25L3 Compact flashlight
Spare o-rings
User Manual
Mil-Spec Para-cord Lanyard w/ quick attachment clip
Flat tail-cap (tail-stand)
3xCR123A Battery Magazines

All models

Base model
Includes everything listed in "what's included" section above.
Comes with smooth aluminum bezel.

YRGB Kit
Includes everything in base mode, plus:
(Extra) signal connection through the body tube for rear accessories add-on
(Extra) tailcap w/ switch and tail-standing ability
Flashlight head come with front-mount thread for bezel and filter attachment
Stainless steel bezel
Heavy Duty Nylon Holster w/ self-retention device and open-top design
ET54 diffuser filter, ET54 yellow filter, ET54 red filter, ET54 green filter, ET54 blue filter.

Replaceable items

Lens

LED

Cool White
6 x CREE XP-G2 S2 LED (CRI 70)
(6500K)

Max output

6 x CREE XP-G2 S2 LED
LED lumen: 3500
ANSI FL-14 lumen: 2450

Beam Profile

6 x CREE XP-G2 S2 LED (6500K)
Center lux: 42,000 lux
Center spot angle: 7.4°
Spill light angle: 63.6°
Beam distance: 448 yards / 410 meters


Lens

Waterwhite glass lens w/ harden treatment
Anti-reflective (AR) coating on both side (96% transparency)

LED circuit

C5000 ST
Current regulated buck driver w/ efficiency of up to 93%
Wide voltage input range
Non-dimming constant current regulation for all output levels without flicking
Low battery voltage warning7
Energy saving feature5
(user adjustable to prolong runtime)
Very low standby current (uA)

Reflector

Smooth aluminum reflector

Material

HAIII hard anodization aerospace aluminum

Waterproof

IPX-8 standard

Carrying method

Para-cord lanyard
Rigid nylon holster w/ retention device

Battery arrangement

Innovative slot load design
No battery tray or battery magazine needed
Battery arragement design patent pending in United Status, Hong Kong, and China

Output and Runtime

6 x CREE XP-G2 S2 LED
Four brightness levels (Regular mode)
Led lumen: 35005-2820/1386/250/30
ANSI FL-1 lumen: 24505-2065/1010/180/23
Runtime: 1.6/3.5/22/350 hours6
Two brightness levels (Tactical mode)
Led lumen: 35005-2820/310/Strobe I/Strobe II
ANSI lumen: 24505-2065/230/Strobe I/Strobe II
Runtime: 1.6/20 hours6


Operations

Basic - Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.
For momentary on, press and hold the button switch for immediate output.
Twist the head to select between four output levels. You can pre-select the desired output level before turning on the flashlight.
Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.
Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off).
To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd or 4th level and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
(Programmable Features) Mode switching: To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for ten times within five seconds.
(Programmable Features) Energy saving feature: Enabled by default, this feature reduces output current by 25% (or 10% when disabled) after 200 seconds at turbo mode. To toggle this feature, turn on the flashlight at 4th level, and dial to 3rd level and then back to 4th level for ten times within five seconds.

Controls

Other features

LED direct soldering on copper for maximum heatsink ability
User replaceable glass lens
Customizable energy saving feature
Battery reverse polarity protection
Tail stand
Extra tail-cap w/ switch for kit version

Warranty

Ten years performance guaranteed warranty
Read flashlight regular maintenance


Optional Accessories (Buy together with flashlight at a discounted price)

3 x Efest 18650 2600mAh Li-ion Protected Battery + 1 x Efest LUC V4 Charger



3 x Efest 18650 3400mAh Li-ion Protected Battery + 1 x Efest LUC V4 Charger



***********************Attention*********************

 

                                                                                                         

    High-brightness LED flashlight bright flashlight. In continuous operation will generate         

    alot of heat. To ensure the safe use carefully read the operating manual and the following  

     warning and suggestions.                                                                                                  

                                                                                                          

     1. Do not turn the torch on the place unattended                                                                                              

      2. Do not give children to play or use a flashlight                                                                                                        

      3. Do not let the torch's glasses to direct sunlight.                                                                                                 

      4. Do not use the direct without the protection of rechargeable lithum batteries                                                          

      5. For a long time when storge or transporation of the torch, remove the battery                                                   

      6. Use a soft cloth to clear every six months torch thread, and use silicone oil lubrication of threads                         

      7. Do not use the oil from the pertroleum refining exposure to water O ring will cause water damage.                                

 

                                                                                                              
***********************Attention********************** 

 

Delivery time:

 

SingPost Registered Mail, we mail out within 0-2 working day together with tracking No. after payment confirmed 

 

For any enquiry, feel free to email us at kaisinstore@gmail.com