There are different types of car lamps with different light color available for you:

The Kelvin Scale:

• Higher color temperatures (5000K or more) are "cold", color is green to blue.
• Moderate temperature (3000-5000K) are "cool", color is white.
• Lower color temperatures (2700-3000K) are "warm", color is yellow to red.

• 1. First, open your car hood and turn off the power
• 2. Check whether the model of headlights correspond with your car
• 3. Remove the original vehicle lamps and circuit wiring
• 4. Drill a hole (About 25 mm diameter) in the middle of the rear cover of the headlamp with a hole saw used for the leading-in of Xenon lamp wire
• 5. Take apart the safety tube of xenon lamp
• 6. Put the xenon bulb into the headlamp unit and lead out high voltage wires from the hole, and cover the hole with rubber ring in order to prevent water and dust into the headlamps
• 7. Fixed the ballast in the right place with screws or mounting bracket, and the best installation location is away from the car engine, such as the side or below of Headlamps and bumper
• 8. Connect the high-voltage line of ballast with the xenon bulb
• 9. Connected to 12V power wire and control line, the red one is positive and the black is negative

• 1. Brighter
  HID Xenon Lamp is three times the light output of traditional halogen lamp, two times the irradiation distance
• 2. Safer
  HID Xenon Lamp provides broader and clearer visual field, removes the dangers of driving in darkness
• 3. Longer Life Time
  The life time of HID lamp reaches more than 3000h, 8 times of traditional halogen lamp
• 4. Lower Power Consumption
  HID lights will be environment friendly. Power of normal HID lamp is only 30W or 35W. You will get "cool" lights instead of "hot" lights

• 1. In order to secure installation, please wait for cars and engine cool completely
• 2. Please make sure the gear is in neutral before installation
• 3. Please make sure the switch is closed when installing
• 4. Be careful not to get burnt when switch the car lamp
• 5. Be careful not to beat and scratch the bulb
• 6. Don´t touch the bulb with your fingers, because it will leave stain on bulb
• 7. Please check connector, Interface port and the wire connection, because the wrong connections will cause lighting problems
• 8. Please don´t let the bulb terminal access to the internal lens hood of headlight assembly
• 9. Please drill a hole (25 mm) in the resin or rubber back cover of the headlamp
• 10. Please make sure the polarity is correct for the connection between bulb and High-voltage starter
• 11. Please make sure the polarity is correct for the connection between ballast and power source

FEATURES

• New product with high quality
• Give more visibility when driving at night
• Power saving, long service life
• Waterproof and dustproof HID meets the high standards of product quality
• Compact modular design for easy installation, only need attach HID bulb to the original lamb hole, stick ballast and connect the power
• The combination of more light output and wide beam will potentially increase safety for you
• The color temperature of xenon lamp is close to the daylight´s, it is comfortable to human eyes
• The luminous for xenon lamp is three times of halogen headlights, energy conservation
• The life span of xenon lamp is more than 3200 hours
• Xenon lamps have enhanced durability and shock resistance compared to coil in bulb
• This xenon lamps with 35W power will bring you the unprecedented comfortable when driving, and help to prevent accidents
• This HID xenon lamp is not tungsten filament and lighten up by the high-voltage electrical stimulation, greatly enhance the life span of lamp
• HID lamps with good color temperature will improve the performance of a car

Specifications

Package Includes

• 2 x D2R 35W 8000K HID Xenon Car Lights Bulbs (Pair)