1. Three ways of optical fiber signal input switch to one set of SPDIF/ToLink signal receive device
2. Audio format support:LPCM2.0/Dolby-AC3
3. Support signal retiming
4. Used optical fiber cable loss less than 0.2Db/m,Output distance is up to 40m
5. Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the hine
6. No loss of quality
7. Installs in minutes
8. Need DC5V/500mA power supply
9. To use the optical fiber cable to connect the optical fiber signal source(such as blue-ray,the computer and so on)with the splitter input.
10. To let the output port connected to the optical fiber signal receiver(such as amplifier,home theater and so on)by using the optical cable.
11. Connect 5V power supply to the splitters DC input port.
Specifications:
1. Support audio format:LPCM2.0/Dolby-AC3
2. Peak wavelength:650nm
3. Max baud rate:16Mbps
4. Output cable distance: 40m(Use the optical fiber cable loss less than 0.2Db/m)
5. Max working current:100mA
6. Power adapter format: Input:AC(50Hz)100V-240V;Output:DC5V/500mA
7. Operating Temperature range:0 to +40
8. Operation Humidity range:5 to 90%RH(No Condensation)
9. Dimension (L x W x H):54x54x23.5mm
Package include:
1x Splitter
1x Remove
1x Power adapter









