D-Link mydlink Cloud HD IR Outdoor IP Camera (1MP (HD), H.264, IR 10M, POE, IP66, ONVIF)

Features


The DCS-7010L HD Mini Bullet Outdoor Network Camera is a mydlink-enabled IP surveillance outdoor camera that lets you monitor an area 24 hours a day. A durable, rugged housing and a powerful IR LED illuminator make it ideal for all-day outdoor surveillance.




24/7 HD Surveillance

The DCS-7010L is built with a megapixel image sensor to give you high-quality snapshots and video with resolutions up to 720p HD. This gives you sharp, high-resolution snapshots and videos with rich detail. Get a closer look with ePTZ, which lets you zoom in, zoom out, and pan across your camera’s video so you can survey a large area easily.
An infrared cut removable (ICR) filter is also built into the DCS-7010L, which blocks infrared light during the day for improved image quality. At night, it moves out of the way to use all available light for low-light surveillance, and paired with a powerful IR LED illuminator with a 10 meter range, this camera can monitor an area even in complete darkness.




Anywhere Access with mydlink

Specially built for outdoor use, the DCS-7010L has a solid metal IP-67 weatherproof housing that protects it from dirt and rain. A Power over Ethernet (PoE) port allows you to connect the camera to your network and power it through a single cable, simplifying deployment and doing away with the need for a nearby power outlet. A wire-in bracket protects cables from damage and provides a clean installation.




Anywhere Access with mydlink

The HD Mini Bullet Outdoor Network Camera is mydlink-enabled, which means that you can access and configure your camera remotely, no matter where you are. See your camera’s live view through the mydlink website, or download the mydlink mobile app and view your camera directly on your iOS or Android mobile device. Keep an eye on your home while you’re at work, or check on the office when you’re out on the road; mydlink makes it all possible.




Zero Configuration

If you have a mydlink-enabled Cloud Router, setting up and configuring your DCS-7010L is a snap, thanks to Zero Configuration. Simply connect your camera to its power adapter and then connect your camera to your mydlink-enabled Cloud Router with an Ethernet cable - the camera will automatically be added to your account. mydlink does the hard work for you, allowing even novice users to set up and use their mydlink-enabled cameras immediately.




Built for Versatility

The DCS-7010L comes with a wealth of features that enhance its surveillance capabilities, making it ideal for any situation. The camera can detect motion, allowing it to automatically record video and send you a notification when motion is detected. Audio in and out connectors can be connected to a microphone and speaker, allowing for 2-way communication and making the DCS-7010L ideal for use in entryways.




A Complete, Expandable Surveillance Solution

The DCS-7010L is a self-sufficient surveillance solution, capable of recording snapshots and video to a MicroSD card without requiring a PC or network storage device.
If you want to expand your surveillance options, D-ViewCam management software is also included, giving you the ability to manage up to 32 cameras with a robust set of features, including multi-camera views and automated e-mail alerts to keep you informed of suspicious or unusual activities.



Specifications


Camera
1/4" Megapixel CMOS progressive sensor
Fixed lens: 3.6 mm F1.8
IP-67 weatherproof housing
Audio in and out jacks can be connected to a microphone and speaker for 2-way communication
Built-in infrared-cut removable (ICR) filter for allday surveillance
Built-in IR LED illuminator with a 10 meter range for use in dark areas
ONVIF compliant

Connections
10/100 Fast Ethernet port with PoE
Micro SD/SDHC Card slot for onboard storage

Image & Video
HD resolution (1280 x 720) and up to 1M (1280 x 800)
H.264, MPEG-4 and Motion JPEG compression
ePTZ viewing
Simultaneous multi-stream support
Privacy Mask feature
Supports multiple access lists
Built-in Samba client for saving to a NAS


Camera Hardware Profile
1/4" Megapixel progressive CMOS sensor
10 meter IR illumination distance
Minimum illumination: 0 lux with IR LED on
Built-in Infrared-Cut Removable (ICR) Filter module
Audio in and out jacks
10X digital zoom
Focal length: 3.6 mm
Aperture F1.8
Angle of view:
-(H) 58.28°
-(V) 33.42°
-(D) 66.47°
Built-in Microphone and speaker


Camera Housing
IP-67 compliant weatherproof housing
Cable management bracket


Image Features
Configurable image size, quality, frame rate, and bit rate
Time stamp and text overlays
Configurable motion detection windows
Configurable shutter speed, brightness, saturation, contrast and sharpness


Video Compression
Simultaneous H.264/MPEG-4/MJPEG format compression
H.264/MPEG-4 multicast streaming
JPEG for still image


Video Resolution
16:9 - 1280 x 800, 1280 x 720, 800 x 450, 640 x 360, 480 x 270, 320 x 176, 176 x 144 up to 30 fps recording
4:3 - 1024 x 768, 800 x 600, 640 x 480, 480 x 360, 320 x 240, 176 x 144 up to 30 fps recording


Audio Compression
G.726
G.711


External Device Interfaces
10/100 BASE-TX Fast Ethernet port
Supports 802.3af PoE Class 0
MicroSD/SDHC card slot
DI/DO port


Network Protocols
IPv6
IPv4
TCP/IP
UDP
ICMP
DHCP client
NTP client (D-Link)
DNS client
DDNS client (D-Link)
SMTP client
FTP client
HTTP / HTTPS
Samba client
PPPoE
UPnP port forwarding
RTP / RTSP/ RTCP
IP filtering
QoS
CoS
Multicast
IGMP
ONVIF compliant


Security
Administrator and user group protection
Password authentication
HTTP and RTSP digest encryption


System Requirements for Web Interfaces
Browser: Internet Explorer, Firefox, or Chrome


Event Management
Motion detection
Event notification and uploading of snapshots/video clips via e-mail or FTP
Supports multiple SMTP and FTP servers
Multiple event notifications
Multiple recording methods for easy backup


Remote Management
Take snapshots/video clips and save to local hard drive or NAS via web browser
Configuration interface accessible via web browser


Mobile support
Windows 7/Vista/XP system, Pocket PC, or mobile phone
mydlink mobile app for iOS and Android mobile devices


D-ViewCam™ System Requirements
Operating System: Microsoft Windows 8/7/Vista/XP
Web Browser: Internet Explorer 7 or higher
Protocol: Standard TCP/IP


D-ViewCam™ Software Functions
Remote management/control of up to 32 cameras
Viewing of up to 32 cameras on one screen
Supports all management functions provided in web interface
Scheduled motion triggered, or manual recording options


Weight
410 g ± 5%


Power
5 V DC, 1.2 A through external power adapter or PoE connection
External Power Adapter Input: 100 to 240 V AC, 50/60 Hz


Power Consumption
6.96 watts max.


Temperature
Operating: -25 to 50 °C (-13 to 122 °F)
Storage: -20 to 70 °C (-4 to 158 °F)


Humidity
Operating: 20% to 80% non-condensing
Storage: 5% to 95% non-condensing


Certifications
CE
FCC
C-Tick
CE LVD