Application

Product	Suitable for Proton Iswara (Sedan/Aeroback)/Saga
Code	UR-FD3-007
Specification	3 Points (2pcs)

Description:

The UR fender bars utilised two mounting points and three mounting points depend on the type of car design， one on the hinge of the front door and the others on the overhang structure itself. The fender bars aimed to strengthen the front overhang on the both side of the car.

The UR 3 points or 2 points fender bar is designed to strengthen the both side area of the car and help to maintain the suspension in position from all kind of vertical loads. Beside that， it can also improve the car handling and stability while cornering; provide better braking and stopping performance; stiffen the front car chassis， and reduce the noise， vibration and harshness of the car.

Benefit after Installing:

Improve Car Stability at least 40% & above
Reduce Understeer
Improve Braking Performance
Improve Sharp Cornering
Improve Safety Aspect & Comfort
Improve Handling Stability
Highly Recommended for Street， Track， Drift， Rally， Autocross， Gymkhana， Drag Racing and etc
Official Color: Pure Solid White
Life Time Warranty

How does it work?

Understanding Between Chassis and Handling : : :

A car chassis is carry by 4 wheels and 4 shock absorbers. When driving on bumpy road， the shock of impact will be absorb by shock absorber， however if the chassis is not strong enough to support the shock absorber， the shock of impact will not all absorb by shock absorber but by chassis， causing chassis flex. Same thing happen when make a turn on corner， chassis will be twisted by the force of weight transfer. Therefore， the handling will be rough and hard to predict the movement of car.

To soft the chassis flex problem and improve the handling， the Ultra Racing's chassis strengthen parts is born， we will explain how this product works on you car. The stronger chassis， the better handling.

Strut Bar and Lower Arm Bar : : :

BEFORE :

Part of the shock of impact transfer to the chassis， causing wheel house and lower arm deforming.

AFTER :

Equip with the Ultra Racing's strut bar and lower arm bar， both side shock of impact will be neutralized.

< < < While entering at corner > > >

BEFORE :

The weight transfer and force gathering on one side， causing unstable handling and increasing body roll.

AFTER :

The force will spread out by Ultra Racing's strut bar and lower arm bar， stabilize the car and provide solid handling.

Fender Bar : : :

BEFORE :

The joint between A-pillar and front chassis will be push and twist by the greater shock of impact and drag force， causing damage on chassis.

AFTER :

Ultra Racing's Fender bar will spread out the force and strengthen the section， prevent further damage and offer stable handling. Recommend for user of sport absorber

Side Lower Bar : : :

BEFORE :

On uneven / bumpy road， center section chassis will have different level of body flex cause by the weight transfer between front and rear.

AFTER :

Ultra Racing's side lower bar will stabilize the weight transfer between front and rear， it can also minimize the damage from side impact.

Anti-Roll Bar : : :

photo strut-bar-corner-after_zpsqt3whmd2.gif

BEFORE :

When turning in corner， the weight transfer will make the car sway a side， causing body roll and more difficult to turn in to a corner， weaken the steering respond.

AFTER :

The upgrade version of Ultra Racing's anti roll bar will be more effectively preventing the car sway a side at cornering， greatly reduce body roll and high stability in cornering

Material Specification and Design

Every materials used are carefully selected to ensure the best performance and safety. The brackets are made of 4mm to 5mm steel plates， while the hollow steel tubes and oval tubes are of 1.2mm to 1.6mm thickness. These materials are selected to ensure the bars are rigid and strong to maintain constant geometry at all times， yet safe enough to crumble during an impact for safety reason

All raw materials has been made and tested with satisfactory result.

MILL / TEST CERTIFICATE (Chemical Composition)

Specification - JIS 3101 SS 400 (Japan International Standard)

- JIS G 3141 SPCC SD (Japan International Standard)

- ASTM A 500 Grade A (American Standard)

- BS 1387 ( British Standard)

Why we use Steel instead of Aluminum?

First， steel is stronger than aluminum for the same size and thickness. In order for aluminum alloys to be at least the same strength as steel， it has to be at least double the thickness (steel 4mm = aluminum 8mm). When that happens， weight saving is not so apparent anymore. Of course there are also exotic materials and alloys that can match the strengths of steel， but the cost are astronomically high and therefore not very cost effective to bring into mass production.

Beware of Imitations

Due to the success of Ultra Racing products， unavoidably there are imitations floating in the market. The management found out that there are more than 10 such companies in the market imitating Ultra Racing bars， namely，Utx， CTecx， 3Mxx， Advxx， Susxx， D2xx etc. These imitators bes