Multi - functional heater
Designation: Mini humidification Fan Heater
Rated Voltage:100V。・40V
Model: SC-828
Rated power: 260W
Electric Shock Level: II
Rated Frequency: 50HZ
Water tank capacity: 128 ml
Spray Time:4 hour
Heating material: Ceramics PTC
Color:Black」ャSilver」ャRed
Product Size: 24.8 。・10 。・10 CM
Type:US Piug

Instructions
1. Touch on the back of the warm air blower touch key」ャ blower start working(Second lamps are always bright/ natural wind mode)」ャ the working state is the natural wind of 1 stalls」ャ touch second natural wind 2 stalls」ャ touch third natural wind 3 stalls」ャ fourth touch the machine to stop working(The second lights went out).
2. In the open natural wind mode press the touch key for 3 seconds」ャ open the heating mode (Third lamps are always bright) heating mode」ャ touch key 3 times」ャ heating 1-3 wind circulation」ャ press the touch key for 3 seconds」ャ Heating mode shutdown(Third lights went out) at this time」ャ work the natural wind model 」ャ but the need to keep the natural wind in shutdown mode delay 20 seconds(Dissipate heat)」ャin order to control through the touch switch keys to stop the machine work (second fan lights out)」ャ to make PTC work life and increase security.
3. Before opening the humidifier」ャ Please add mineral water to the storage tank」ャ Adding water step」コThe front net cover is pulled out from the top of the card」ャ remove the net cover」ャ at the top of the tank cover clockwise rotation」ャThe water level can not exceed the position of the step」ャAfter adding water」ャ please install the water tank cover」ャ turn it counterclockwise」ャ tighten the net cover」ャ and then start the humidifying function」ャPress the top and back switch」ャ humidifier work spray(Four lamps are always bright).
4. temperature and humidity to achieve their ideal state」ャ you can touch / control the key」ャ turn off the heater and humidifier (fourth lights went out)
5. When heating the air heater」ャ please don't cover or block the air inlet and outlet. If you need to adjust the direction of the air outlet」ャ you can manually rotate the fuselage directly.
Warning: In order to avoid over-heating」ャ please do not cover the heater