Item Descriptions:

If you install a waterproof smartphone mount holder, you can enjoy the smartphone function comfortably.

Smartphone Holder Mount Waterproof 360 degrees can be rotated.

Waterproof specification (not waterproof) that protects smartphones and others from sudden rain.

Motorbike bike You can attach it to a bar handle such as a bicycle.

Touch screen operation is possible with the smartphone in the case.

※ Applicable model: iPhone 6 6s 7 Plus can be installed of course, but please purchase tablet terminals such as Nexus Galaxy xperia after checking the size and case size.

It does not use any tools or troublesome screws at all, it is easy to install on the bar handle.

The main body can rotate 360 ​​degrees.

Since the ball joint is mounted on the mount, it can be adjusted to an angle that is easy to see up, down, left and right.

Case outer dimensions: Length about 18 cm X Width 10.5 cm X Height 3 cm Inside dimension: Length About 16.5 cm X Width 8.7 cm X Height 2 cm Bar handle can be mounted in diameter of about 20 mm to 30 mm

Depending on the size of the smartphone, there are cases where installation is impossible so please purchase after confirming well before purchasing.

Accessories: Urethane spacer for internal height adjustment 2 pieces 3 mm + 10 mm each 1 piece Splining prevention spring strap 1 piece (Please devise and use it for fall prevention etc.) With simple instruction manual

Protects the smartphone from sudden rain, waterproof specification (not waterproof)

When navi or smartphone is put in the case, urethane spacer for height adjustment is attached to each 3 mm and 10 mm each for close contact with the case surface to improve operability.

In case

The case can rotate 360 ​​degrees.

In case

【installation method】

1.

Please attach the holder to the mount.

In case

As the measures to prevent the mounts and holders from falling off due to vibration or the like are becoming hard to fit, you can set the mounts and holders and put more force and push it in to fix it.

In case

2.

Please adjust the angle with the mount and the holder.

In case

3.

Please attach the mount to the handle etc.

In case

Please be sure to check your dimensions of navigation and smartphone before purchasing.

In case

Although the transparent vinyl part of the case is somewhat, it may be wavy.

In case

Since the transparent vinyl of the case is a thick material, the reaction of touch operation may be bad.

In case

Image smartphone etc .. is not attached.

In case

This product is not a product that guarantees sufficient fixation.

In case

Those who wish to fix sufficiently please fix screws, bonds, rubber etc and prepare them.

In case

Because it is not heat resistant specification, there is a possibility of dropout of the mounted item depending on the usage situation.

Avoid using it in a place exposed to direct sunlight.

It may cause cracks, warping, etc.

Features:

• Smartphone Holder Mount Waterproof 360 degrees can be rotated.
• Waterproof specification (not waterproof) that protects smartphones and others from sudden rain.
• Motorbike bike You can attach it to a bar handle such as a bicycle.
• Touch screen operation is possible with the smartphone in the case.
• * Compatible models: iPhone 8 8plus X 7 7s 7plus 6s 6 6s plus 6plus can be installed, of course, but please purchase tablet devices such as Nexus Galaxy xperia after checking the size and case size.
• It does not use any tools or troublesome screws at all, it is easy to install on the bar handle.
• The main body can rotate 360 ​​degrees.
• Since the ball joint is mounted on the mount, it can be adjusted to an angle that is easy to see up, down, left and right.
• Case outer dimensions: Length about 18 cm X Width 10.5 cm X Height 3 cm Inside dimension: Length About 16.5 cm X Width 8.7 cm X Height 2 cm Bar handle can be mounted in diameter of about 20 mm to 30 mm
• Depending on the size of the smartphone, there are cases where installation is impossible so please purchase after confirming well before purchasing.
• Accessories: Urethane spacer for internal height adjustment 2 pieces 3 mm + 10 mm each 1 piece Splining prevention spring strap 1 piece (Please devise and use it for fall prevention etc.) With simple instruction manual

Product information:

Shipping Weight: 240 g

Package Dimensions: 8.41 x 13.41 x 22.40 cm