[Product Information]

Removing the A1418 display on iMac requires cutting through the adhesive around the perimeter of the screen. After the adhesive is cut, it cannot be used to re-seal the display in place, so you'll need to apply a new set of adhesive strips.
Before you start placing strips, remove all of the old adhesive. Use a spudger to scrape up an edge, then peel with your fingers.Remove all of the remaining adhesive strips from the iMac's frame and display glass.
Include: Adhesive Strips Replacement X 1Set; Spudger X 1Pcs;Opening tool X 1Pcs;Opening card X 2 Pcs
Note: Professional Operation Only! This opening tool easily scratch your screen.We are not responsible for any damage during teardown.
Please heating the adhesive strip before installtaion, to make sure the adhesive tape tightly stick to the liquid crystal.press the edge of panel and let the panel lay down for a few minutes.