Thermometer & timer that can be used in kitchens↔? laboratories and factories with ALARM function.<br /><br />Thermometer range: -50??C ~ 300??C.<br />1: Install a AAA battery. (AAA1.5VDC)<br />2: Turn the TIMER-THERMO switch to THERMO position. It displays the current temperature and the set alarm temperature.<br />                      2 5??C ?? current temperature<br />                      5 0??C ?? setting mode<br />3: Built-in alarm temperature is 50??C↔? using UP-DOWN button to set the appropriate temperature.<br />    Press UP to increase temperature value↔? press DOWN to reduce the temperature value↔? hold UP or DOWN can quickly increase or reduce the temperature.<br />4: If set a wrong temperature value↔? press the UP & DOWN button at the same time to reset.<br />    Note: When the thermometer has been set temperature↔? do not turn TIME-THERMO button↔? otherwise it will cancel the set temperature.<br />5: Press the START button once↔? the alarm ready mode will replace setting mode.<br />6: When the current temperature reaches the set temperature value↔? there will have alarm sound↔? press the STOP button once↔? the alarm sound will stop.<br /> <br />Timer Usage:<br />This timer can be set by hour↔? minute and second. The maximum set is 99:59:59.<br />1: Turn TIME key to the TIME position↔? setting mode will appear as:<br />                    00:00 00 ?? setting mode<br />2: Press the MIN and SEC at the same time can reset the timer value (Repeat the above step↔? you can stop setting or reset)<br />3: With the MIN and SEC button to set.<br />    Press MIN to set minute and hour; Press SEC to set second.<br />    Hold the SEC or MIN↔? then the corresponding bit value rapidly increases↔? when the minute-bit value is to 60 bits↔? the hour digit is automatically increased by 1.<br />4: When you set a wrong time↔? RESET can reset (see Step 2).<br />5: When you set the correct time↔? press the START key once.<br />    Note: When the timer is set↔? do not turn TIMER-THERMO button↔? otherwise it will cancel the set time.<br />6: When the alarm ready mode replaces setting mode↔? the timer starts counting down.<br />7: When the countdown is to 00:00 00↔? it begin to alarm.<br />8: Now press STOP once↔? the alarm is stopped.<br />9: Press RESET↔? timer will back to the initial setting mode.<br />10: With 1.1 m sensing line. (Do not applied to objects above 300??C.)<br /><br />1 x Thermometer <br />1 x Sensing line<br />1 x English user manual<br />In card paper blister package<br /><img src="http://img6.eachbuyer.com/x9/p100/cb396_1.jpg" />                                                        <img src="http://img6.eachbuyer.com/x9/p100/cb396_2.jpg" />                                                        <img src="http://img6.eachbuyer.com/x9/p100/cb396_3.jpg" />                                                        <img src="http://img6.eachbuyer.com/x9/p100/cb396_4.jpg" />                                                        <img src="http://img6.eachbuyer.com/x9/p100/cb396_5.jpg" />                                                        <img src="http://img6.eachbuyer.com/x9/p100/cb396_6.jpg" />                                                        <img src="http://img6.eachbuyer.com/x9/p100/cb396_7.jpg" />                                                        <img src="http://img6.eachbuyer.com/x9/p100/cb396_8.jpg" />