Mounting bracket kit made to work with SuperSprings
Induces preload tension on SuperSprings to ensure silent operation
Includes U-bolts, cross plates, washers and nyloc locking nuts
Maintenance free; fit it and forget it
Made in the USA

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 5.2 inch
Height : 2.91 inch
Length : 14.8 inch

Item Weight: 10 pounds (View shipping rates and policies)
Shipping Weight: 12.85 pounds (View shipping rates and policies)

ASIN : B000NZPNA4

Product Description

SuperSprings Mounting Kits

SuperSprings mounting kits have one simple function; to induce some preload tension onto the installed SuperSpring. This is done to ensure that when the upfitted vehicle is unloaded, the SuperSprings operate silently.

The 2” tall mounting brackets act as fulcrum points on the underside of the SuperSpring and the shackles at each end of the springs secure it in place, pivoting as load is transferred to the springs. The mounting brackets bolt to the vehicle spring pack on either end using the u-bolts, cross plates, washers and nuts provided. All nuts provided are nylok self-locking and will not loosen when correctly installed. After installing the mounting bracket, tighten the u-bolt nuts while the vehicle is off the ground. After the SuperSprings are installed and the vehicle is on the ground, retighten the u-bolt nuts.

MTKT vs. MXKT

SuperSprings produces two versions of the mounting kit; MTKT and MXKT. The leg-length of the u-bolts provided in the MTKT are 4” long. If your vehicle’s spring pack has had extra leaves added you might require the longer, 5 ¼” u-bolts supplied in the MXKT. To verify the correct kit please measure the height of your spring pack directly above the axle. If this measurement is less than or equal to 2 ¾” you will need the MTKT. If the measurement is greater than 2 ¾” you will need the MXKT.