Studio : CEESC

Publisher : CEESC

Binding : Misc.

Product Description

Product information:

Material: PP plastic

Type: Hanging without magnet control openclose

Product Weight: Large: 1.54 lb, Small: 0.57 lb

>Product Size:

L: outer door frame: 14.17"(W) x 18.11"(H) inner door: 12"(W) x 16"(H)

S: outer door frame: 11.42"(W) x 14.57"(H) inner door: 8"(W) x 10"(H)

Install steps instruction:

1). Take out the screen and lay it down on a flat hard surface. Separate the frames of the pet door by knife or screwdriver, place them on opposite side of the screen, a lower corner is preferred.

2). Align the pins with holes of the two frames, snap them into place together with your palm and fingers, and then tap them with a hammer. Ensure the pins cross the screen before you snap them, that will help you to close them better and easily.

3). Use a knife to separate 3 sides of the door (left side, right side, bottom) from the frame. Make sure to separate corners completely, snap the two latches into slots.

Note:

1). Due to manual measurement error, 1~2mm difference in size is normal, thanks.

2). Make sure that the width and height(shoulder level) of the pet are inferior to the pet screen door, thanks.