Are you searching for where to buy a pink tattoo machine? Your search ends here!This is 10 Wrap Coils Low-Carbon Steel Liner Shader Beginner Tattoo Machine Pink 095E. It is New and high quality. It has beautiful appearance， special surface treatment. It is the best for beginner!                                    Features            New and high qualityBeautiful appearance， special surface treatmentCome with a 10 wraps manual coilCoil using the latest technology， eight high quality laps solenoid valveThe spring made of superior composite material with high elastic for long time anti-fatiguePure iron armature bar with excellently conductive magnetic performanceStable bouncing， strong magnetic back seatThis tattoo machine is a pro-quality beauty product with everything you′ll need to tattooThe best for beginner                                                            Specifications            Model    HB-WPT095E    <br>Frame Material    Low-carbon Steel    <br>Productive Technology    Stamping    <br>Recommended Use    Multi-use (Liner or Shader)    <br>Coils    10 warps coils; 1.26" (32mm)    <br>Working Voltage    6-8V    <br>Starting Voltage    3V    <br>Optimum voltage    5-8V    <br>Running Speed    2500 R / Minute    <br>Capacitor    33μ    A-Bar Material    Pure iron    <br>Front Binder Material    Brass    <br>Rear Binder Material    Brass    <br>Spring Thickness    0.50mm rear spring !#!amp!*! 0.50mm front spring    Color    Pink    <br>Size    3.15 x 1.18 x 3.35" / 8 x 3 x 8.5 cm ( L x W x H )    <br>Weight    195g    <br>                                                            Package Includes            1 x 10 Wrap Coils Low-Carbon Steel Liner Shader Beginner Tattoo Machine Pink 095E                                                            Extra Info            Why the machine cannot start Malfunction     Solution     <br>The spring pole does not touch the contact point of the slanting spring    Loosen the screw of spring pole; rotate down the spring pole to the contact point， and then rotate it through 180°-360°. Tighten the screw to lock the spring pole    <br>The switch is off    Connect 220V AC power supply and turn on the switch. The indicator flashes red    <br>Both of Adjustable knob (VOLTAGE) and V meter hand are in "0"    Rotate the adjustable knob clockwise slowly. Simultaneously， V meter hand is also moving. V meter hand should stop at 10V-12V    <br>The spring pole touches the contact point of front spring so tightly that the machine cannot start， which maybe even cause short circuit. Turn on the switch， the indicator flashes green (No Voltage)    Loosen the screw of spring pole; rotate up the spring pole for readjustment to the contact point， and then 180°-360° rotation. The indicator is green after it is short-circuited. Turn off the switch and then on again， the indicator will be red.    <br>Disconnect the cord from joint position owing to careless jerk during the daily working    Check the foot switch and the plug    <br>The wires are broken while washing and sterilizing the tattoo machine    Confirm the broken wires condition and have them welded    <br>Turn on the switch when short circuit happens， and the indicator turns green    Check whether the plugs of cord and foot switch are broken or not. The damaged ones could cause short circuit， which should be welded with electric iron.    <br>