- 18mAh Car Jump Starter Power Bank Storage Charger
- Brand New!!!
-
- Battery Specification:
Battery Type: High Quality Li-Polymer
Battery Capacity: High capacity 18， mAh
Battery Size: 155(L) x 75(W) x 25(H) mm
Ideal Operating Temperature: ℃ - 6 ℃
Complete Charging Time: 2-3 Hours
Lifespan: Up to 1 Times Cycle Life
Voltage/Current:
Input Voltage/Current:12V/1A
Starting Current: 2-4A
for peak Current: 4A(3S)
Input Current: 15V/1A
for d c Output Voltage/Current: 12V/2A， 16V/3.5A，19V/3.5A
USB Output Voltage/Current: 5V/2A
LED Emergency Light:
Power: 3W
Modes: General Lighting，/SOS Distress Signal/Bright Flash Lighting
Light Color: White
Dimension:
Package Size: 26(L)*19(W)*6(H) mm
Carring Tool Bag Size: 26(L)*18(W)*5(H) mm
Features:
- Brand new and high quality
- High capacity battery， multifunction charger， fully equipped with accessories
- Supports 12V vehicle jump starter， quick charger， low self-discharge， various cell phones， for psp， MP3/MP4， PDA， Laptops， car refrigerator
- 5-7 times to full charging of for iphone or mobile， 2 times starting a vehicle when fully charged
- Also suitable for internal or external use， ideal for everyday driving， traveling and outdoor activities
- Safe and reliable， multiple safety for protection design
Package Included:
1x Carring Tool Bag
1x 18， mAh Jump Starter Battery
1x Storage Battery Wire Clip
1x Four-in-one Mobile Phone Adapter
1x Car Charger Adapter
1x Power Adapter
8x Laptop Adapter (with a cable)
1x User Manual In English
Installation Instructions:
For jumping start of 12V vehicle
1.Make sure that electricity power is not less than 4%.
2.Connect the red battery clamp of jumper cable to the vehicle\'s positive(+)battery terminal and connect the black battery clamp of jumper cable to the vehicle\'s negative(-)battery terminal.
3.Plug the cord of jumper cable into the jump socket.
4.Start the vihicle.
5.When the vehicle starts，remove jumper cable from Jump Starter and disconnect red and black clamps to the vehicle battery terminals within 3 seconds.
6.Leave the vihicle\'s engine running.
For charging/power supply to the Notebook
1.Select appropriate adapter for your Notebook and connect it with the offered cable.
2.Plug the cable into Jump Starter output port.
3.Plug adapter to your Notebook.
4.Press the switch button to charge/power supply.
For charging to mobile phones or tablets
1.Select appropriate phone adapter for yourmobile phones or tablets and connect it with the offered cable.
2.Plug the cable into Jump Starter USB output port.
3.Plug adapter to your mobile phones or tablets.
4.Press the switch button to charge/power supply.
For power supply to 12V vehicle products or 12V electronics
1.Plug the optional switch cable to 12V 2A output port.
2.Connect the optional switch cable and 12V vehicle products or 12V electronics.
3.Press the switch button to power supply.
