3D Printer Ultimaker PCB V1.5.7 Control Board

Ultimaker PCB V1.5.7Control Board is a board that's very similar to other Pololu-based electronicsimplementations, including RAMPS, but it can support up to 5 steppers (threefor X, Y, Z, one for an extruder and one for any other function). You can addas many stepper driver carriers as you need. It is designed to run at highervoltages than 12 Volts, This allows you to put 90 Watts out of one MOSFET andrun your stepper motors with more torque and higher maximum speeds. This boardis also used on the Mantis-30 milling machine from Protospace and on variousMendel's that people have built

Features:

.Arduino Mega Shield
.Plug in all motors with simple 4-way JST connectors
.Made for Ultimaker's UltiStepper Driver
.Compatible with Pololu stepper driver boards
.Controls up to 5 stepper motors (3 for the X, Y and Z axis one for an extruder(the "E axis"), optionally you can add another axis by adding aPololu stepper driver
.Configurable step sizes by placing jumpers
.3x 55 Amp MOSFETs outputs (with LED indicators. Actual current capability limitedby PCB and connectors)
.All pins are broken out for maximum extensibility
.Runs from 15V to 19V
.Three thermocouple inputs, or thermistor inputs. The 100K thermistor isrecommended
.Has a IDC header for adding an LCD panel (movie here)
.Has a header for adding an SD card module
.A toggle-switch for powering up/down the board
.Easier to wire up thermocouples
.Includes a 12V regulator for an (always on) fan to cool the electronics
.A PWM output with power for LED arrays and other lighting
.LCD backlight dimming can now be software controlled
.A serial I/O header for bluetooth and ethernet add-ons
.Servo outputs for experimental setups. They need to be interrupt or softwaredriven as the pins routed to the servo header I/O do not have PWM
.New features and improvements of previous version: Compatible withUltiController
The Arduino Mega 2560 can be self-powered from the DC-jack. - Jumper added forcontrolling autonomous power setting - 100 uF connection to Vcc2 - High-currenttrack from DC jack and ON/OFF switch moved slightly - Better suiting thefootprint of the rocker switch Marlin firmware compatibility is unaffected bythis updated PCB

Specifications:

.Color: Blue
.Product Weight:15g
.Package Dimensions:200*110*30mm
.Packing: OPP Bag Packing

Package Content:

.1 x 3D Printer Ultimaker PCB V1.5.7 Control Board