Motorcycle Bike Chain Breaker Drive Splitter Link Removal Repair ToolDescription: This is an essential tool to have for anyone working on their own machine. Remove chains and extra links with easeSuitable for chain 420、 428、 520、 525、 530 Replaceable press pin is heat treated and hardenedPlease be sure to verify that the push pin is aligned properly with the chain pinIt is recommended to grind off the chain pin head before using this toolThis will significantly reduce the load on the tool and help prevent premature wear or damage to the breaking tipsInstallation Instructions:1. Unscrew bolt "A" so that the pin "C" is fully retracted into the bolt "B"2. Unscrew bolt "B" and position the chain under "B"、 so that the ends of the chain pin can fit into the holes "D" adn the bolt "B"3. Thread bolt "B" in until the chain is clamped in place、 against the hole "D"4. Turn bolt "A" to push the chain pin head out of its plate5. Repeat the operation on the second pin of the link to be disassembled Specification:Color: BlackMaterial:MetalSize: Approx. 12cm x 6.4cm\/ 4.72" x 2.52"Quantity: 1pc Package included: 1 x Motorcycle Chain Breaker Splitter Link Removal Tool