Brand new and professional module <br />High quality<br />Module size: 50 x 26 x 17 mm<br />Sensor cable length: 20cm<br />Weight: 18g<br />Power supply voltage: DC5V<br />Current: more than 150mA<br />Load: AC 250V 10A or DC 30V 10A <br />Instruction for using:<br />1. Flame sensor is most sensitive to flame. It also responses to sunlight. It is usually used as a flame alarm.<br />2. By adjusting the potentiometer, you can set the intensity of the flame sensor senses flame. When the flame exceeds the set value, the relay will pull in, and the common terminal and normally open terminal are connected. When the flame is below the set value, the relay is off, and the common terminal and the normally close terminal are connected;<br />3. The three terminals, namely, common terminal, normally open terminal and normally close terminal are equivalent to a dual-control switch, when the relay wire coil has power, the common terminal and the normally open terminal are connected, when there is no power, the common terminal and normally close terminal are connected<br />4. Please keep the sensor from the flame in a certain distance, so that high temperature will not damage the sensor. The test distance of the flame of a lighter is 80cm. The greater the flame, the farther the distance.<br />1 x Module<br />1 x Extension cable<br /><img src="//agdetail.image-gmkt.com/m430/073/623/599623073/img/agdetail.image-gmkt.com/073/623/599623073/img/img6.eachbuyer.com/x9/p100/bn145_1.jpg" />                                                        <img src="//agdetail.image-gmkt.com/m430/073/623/599623073/img/agdetail.image-gmkt.com/073/623/599623073/img/img6.eachbuyer.com/x9/p100/bn145_2.jpg" />                                                        <img src="//agdetail.image-gmkt.com/m430/073/623/599623073/img/agdetail.image-gmkt.com/073/623/599623073/img/img6.eachbuyer.com/x9/p100/bn145_3.jpg" />