Model: ATZ HDMI-444
Description: 4x4 HDMI1.4 Matrix Switch w/Remote Control+RS232+EDID Selector

Remark:

The connection of the main adapter to the HDMI Matrix switch must be done at first, afterwards you can connect the main adapter to the power outlet. Any other way of connecting of the main adapter to switch / power outlet can cause the damage of the device.

Introduction:
This is a high performance HDMI Matrix with four HDMI inputs & four outputs. It allows any source (Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on the any of the four displays simultaneously, and supports 4K×2K, 3D, Deep Color. With its 3Gbps bandwidth and the additional features of the latest HDMI standards you can be sure of great HDMI distribution.

Features:

Supports display resolutions up to 4K x 2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
3D HDMI 1.4a video format support.
3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock.
Supports deep color up to 48-bit per pixel.
HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT).
Supports reception of any audio data conforming to the HDMI specification 1.4 such ad L-PCM at up to 192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR.
Full colorimetry including sYCC601, Adobe RGB, Adobe YCC601, xvYCC extended gamut color.
Operates for TMDS clock frequencies up to 300MHz.

III. Package

HDMI Matrix --------------------------------------------------------- 1PC

Adaptor ---------------------------------------------------------------- 1PC

Operation Manual ---------------------------------------------------- 1PC

Remote Controller------------------------------------------------------1PC

RS232 Serial Cable----------------------------------------------------1PC

Specifications

Frequency Bandwidth	297MHZ[10.2Gbps]
Input Ports	4 x HDMI Female input ports
Output Ports	HDMI Female output ports
Power Supply	DC 12V, 2.5A
ESD Protection	Human Body Model: ± 8kV (air-gap discharge)
	± 4kV (contact discharge)
Dimensions (mm)	115(W) X 270 (D) X 45 (H)
Weight (g)	900
Operating Temperature	0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature	-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity	20 ~ 90% RH (Non-condensing)
Power Consumption (Max)	20W

Operation Controls and Functions

Front Panel:

ON/OFF: Power on/off switch.
POWER: This red LED illuminates when the device is connected with power supply.
IR IN: Remote control signal receive.
OUTPUT A: Press this button to select the input source to HDMI OUTPUT A, and these red LED illuminate when the output select to the corresponding input.
OUTPUT B: Press this button to select the input source to HDMI OUTPUT B, and these red LED illuminate when the output select to the corresponding input.
OUTPUT C: Press this button to select the input source to HDMI OUTPUT C, and these red LED illuminate when the output select to the corresponding input.
OUTPUT D: Press this button to select the input source to HDMI OUTPUT D, and these red LED illuminate when the output select to the corresponding input.

Rear Panel

INPUT PORTS: LED1-4 illuminate when the HDMI signal plug in INPUT 1-4 port.

INPUT 1-4 ports are where you connect the HDMI source.

OUTPUT PORTS: LED A-D illuminate when the TV plug in OUTPUT A-D ports.

OUTPUT A-D ports are where you connect the HDTV or monitor with HDMI cable

RS232: This port can control the matrix via PC.
DC 12V: Plug the 12V DC power supply into the unit and connect the adaptor to AC wall outlet.

Right Panel

EDID Selector: Select HDMI output signal format via EDID Selector.

Number	EDID Selector	Description
1	0000	Auto mode(default)
2	0001	1080I,Stereo Audio 2.0
3	0010	1080I,Dolby/DTS 5.1
4	0011	1080I,HD Audio 7.1
5	0100	1080P,Stereo Audio 2.0
6	0101	1080P,Dolby/DTS 5.1
7	0110	1080P,HD Audio 7.1
8	0111	3D,Stereo Audio 2.0
9	1000	3D,Dolby/DTS 5.1
10	1001	3D,HD Audio 7.1
11	1010	4K2K,Stereo Audio 2.0
12	1011	4K2K,Dolby/DTS 5.1
13	1100	4K2K,HD Audio 7.1
14	1101	1024x768 DVI
15	1110	1920x1080 DVI
16	1111	PC Software control mode

VI. Application Example

VII. Remote control

OUT A: Press 1234 button will to select input source to HDMI OUT A, and the LED will indicate the corresponding input source.

OUT B: Press 1234 button to select input source to HDMI OUT B, and the LED will indicate the corresponding input source.

OUT C: Press 1234 button to select input source to HDMI OUT C, and the LED will indicate the corresponding input source.

OUT D: Press 1234 button to select input source to HDMI OUT D, and the LED will indicate the corresponding input source.