This meter is designed to measure & display both moisture and temperature simultaneously. It can quickly measure 7 different materials includinghard woods， soft woods， cement mortars， lime mortars and bricks and other building materials. It offers both Auto Range and Manual Material Selection. The insulated pins measure moisture content at varying depths -- you can tell whether the moisture content near the bottom of a board is higher than near the top.

Moisture meter is the sure way to help minimize moisture problems in lumber production， drying， and in all phases of furniture manufacturing and woodworking. In concrete， it assess water damage and determine when subsequent coats of finish can be applied.

Essential instrument for every professional floor mechanic， DIY， in building and engineering projects， etc.

Measure & display both humidity & temperature simultaneously
Wide range: 0~95.7% moisture & -10~50C(14~122F) temperature
Automatic range selection
Manual material selection
Durable & stable humidity sensor
Instantaneous precise measurement
7 different materials (Hard wood， Soft wood， Cement mortar， Lime mortar， Bricks)
Selectable C or F
Auto & Manual power off
Continuous working mode
Low battery indicator
Good circuitry design， uses power efficiently
Over range indicator for moisture
Backlight function
Tested according to European international guidelines and standards (CE Marking)

Protection Class: IP20
Digital display: 3 digits
Designed according to CE directive: 2004/108/EC
Parameters: % material moisture contents ， temperature C， F
Measurement range:
- >>Moisture: 0.0%~95.7%
- >>Temperature: -10~50C
Accuracy:
- >>Conductivity measurement: %2
- >>Temperature: 1C
Resolution:
- >>Moisture: 0.1%
- >>Temperature: 0.1C (0.1F)
Response time:
- >>Moisture: 1s
- >>Temperature: 125ms
Measurement selection:
- >>Material 1: 8.9~95.7%
  (Hard wood such as Beech， Spruce， Larch， Birch， Cherry， Walnut and so on)
- >>Material 2: 7.1~80.0%
  (Soft wood such as Oak， Pine，Maple，Ash-tree， Douglas fir， Meranti and so on)
- >>Material 3: 1.0~2.5%
  (Cement or Concrete plane， Plaster produce)
- >>Material 4: 0.0~3.3%
  (Anhydrite plane)
- >>Material 5: 0.7~3.8%
  (Cement mortar)
- >>Material 6: 0.5~7.4%
  (Lime mortar)
- >>Material7: 0.0~23.4%
  (Bricks)
Automatic & Manual shutdown / Continuous working mode
Power supply: 3 x AAA DC1.5V
Operating temperature: -10~50C
Storage temperature: -40~70C (-40~158F)
Size: 121 x 60 x 30mm
Weight: approx. 180g (including battery)

Set Includes

1 x Moisture & Temperature Meter
3 x 1.5V AAA Battery (FREE)
1 x Protective Cover
1 x Hard Protective Plastic Carrying Case (FREE)
1 x Wrist Lanyard/Strap (FREE)
Quick Start Manual