● 3528 SMD top LED， high intensity and reliability.?

● with more than 50，000+ hours?

● Cuttable every 3 LEDs along the cutting marks， according to pratical requirement.?

● Flexible ribbon for curving around bends?

● Low power consumption?

● Anti-dust， shockproof

● Widely used for decorations such as home， hotels， clubs， bars， shopping malls， automobile and bicycle decoration.

● Extensively applied in backlighting， concealed lighting， channel letter lighting， emergency and security lighting， advertisement sign lighting.

44 keys IR remote control

● Connection mode: common anode

● Input: DC 12V

● Output: 3 circuit

● Output current: !#!lt!*! 2A per circuit

● 8 Lighting mode: Quick/Slow/Auto/Flash /7 color fade change/3 color fade change/7 color jumpy change/3 color jumpy change

See the instruction for detail.

！If the remote controller's color does not match with the light's color， please operate by following the instructions below:?

1. Turn the light off by ON/OFF key of the remote controller .?

2. Place the remote controller towards the signal receiving port of the controller and press the key on the lower right corner( 24 keys remote controller: Please press "SMOOTH" key. 44 keys remote controller: Please press "FADE7" key ). If the strip light flashes， it indicates successful adjustment.?

3. Turn the light on by ON/OFF key of the remote controller and observe whether the lighting color is matched with the remote controller's color. If the lighting color is still not matched with the remote controller's color， then repeat the steps above until the color is matched(6 times for a cycle).

Note:?

1. There are positive and negative pole on the 4PIN joint of the strip light. Wrong wiring will lead to strip light not being bright or the lighting color being unable to adjust. Pay attention to the installation direction and there is a direction indicator on the plastic terminal.

2. The product can realize jumpy change of three colors R， G， B and brightness control of a single color of the whole strip light. It can not combine to light of white and other colors.