specifications
material: aluminum 6061
surface treatment: anodized
color: blue
black drill bushing: diameter 9.5mm (steel jacket heat treatment)
product size:
1. slant-hole device:
90mm x 47mm x 36mm(length * width * height)
2. 9.5mm stepped drill: 58mm (length)
3. stop ring: 13mm (height)
4. phillips screwdriver: 150mm (length)
5. allen wrench: 60mm (length)
6. tool box: 200mm x 120mm x 80mm (length * width * height)
scale: laser engraving (non-sn printing, prolonged use of the mark will not wear)
suitable for:wood drilling
features
-for use with pocket hole joinery
-good abrasion resistance, long service life
-chip , giving a wrench
-sharp knife head, smooth without burr
how to use
1. adjust the height of good drill,
2. clamped fight wood,
3. drill holes into touch wood,
4. the drill bit then put up five millimeters (remember not to start against the wood drill),
5. start the drill reaches a certain speed 500-1500
6. advanced to slow down, and other fine tip drill into the half or full-forward, then feed can accelerate
packing included
1 x slant-hole device
1 x 9.5mm stepped drill (with stop ring)
1 x phillips screwdriver
1 x allen wrench
1 x tool box 
