Speed Out Screw Extractor Drill Bits Guide Set Broken Damaged Bolt

Features:

Removes any screw or bolt! (Phillips, flat, hex, painted & more)

Durable hardened steel construction

Quick & easy to use

Works w / any drill

Removes any stripped screw in 10 seconds or less

Even works on jagged, uneven, or rough breaks

Self centering tip, no walking

Compatible w / quick connect chuck systems

size: 1 #, 2 #, 3 #, 4 #

Usage:

remove broken screw in the wood, a head drill wood screw hole firstly, then use another head take screws.

If you've ever stripped a screw or broken off the head of a bolt, you know how frustrating that can be. Well, not anymore. Introducing the damaged screw and bolt remover. With Screw Remover, you can easily remove any stripped screw in ten seconds or less. You'll never again be slowed down or frustrated by a stripped screw or broken bolt. If you can use a drill, you can use the Screw Remover. In fact, this patented process works so well it can even remove . stubborn deck screws out of redwood Even if you break off the entire head of a screw or bolt, you can still extract it right out No problem Made with Durable Hardened Steel and is reusable Great for:..! Contractors, Carpenters, Handymen, Do-it-Yourselfers, Great for Anyone! Works with ANY Screw or Bolt of ANY size! It is so simple, Anyone can use it!

How It's Used

Operating Instructions

directly into drill or quick-change chuck-Burnishing end is showing

Set drill for reverse (counterclockwise).

Place Burnishing end of tool into damaged screw, slowly clean inside screw head until smooth Note:. Burnishing tool end in not to be used to drill a hole.

Removing

Remove Burnishing end from chuck, flip tool, replace into drill chuck-Remover end now showing.

Maintain reverse setting (counterclockwise).

Place Remover end of tool into now smooth screw head.

Apply firm downward pressure, drill at slow speed. Apply lowest level of power to the hand drill.

Remover end will thread into screw head and remove

package included:

4pc Damaged Screw Extractor w / case.

4pcs/set Screw Extractor Set Remove broken screw free shipping

Remove broken and damaged screws and bolts in two easy steps. Each of the four dualendedbits in this set feature a burnishing tip to prepare the screw or bolt for removaland a threaded tip to grip and extract them when powered with a 3/8" drill. Removesmany types of screws up to 4" in length including hex, Phillips, torx and square driveand bolts up to 3/8". Each of the four bits are different widths to handle a differentrange of screw and bolt sizes.

Additional Features:

Bit #1 handles No. 4-No. 7 screws and No. 10 bolts (5mm)

Bit #2 handles No. 8-No. 10 screws and 1/4" bolts (6mm)

Bit #3 handles No. 11-No. 14 screws and 5/16" bolts (8mm)

Bit #4 handles No. 16-No. 24 screws and 3/8" bolts (10mm)

Package contents:

1 x Remover Screw set

No More Hassles!

No More Frustration!

No More Wasted Time

Notice,

ship without retail box,just in black box.