Feature:It can be applied to car used， motorcycle parts， metal， mobile phone， laptop， furniture window molding. etc. It can be cut for the shape you like.Type: 4D Carbon Fiber VinylMaterial: VinylColor: RedQuantity: 1PcFunction:Decoration，Waterproof，Air Release，Self-AdhesiveSize: 12" x 60"(30 CM x 150CM)Package Included:1 x StickerInsulation:what you will need ?1.Stanley blade(precision cutting blade)2.Heat gun/Hair dyer3.Plastic/Soft Squeegee(available in our tools section)4.Patience Process ?1.Clean the object you are wrapping.This ensures that the vinyl adheres properly.2.Prepare the item you need，see above.3.Cut the film to a size that fully covers your object，make sure it is bigger not smaller，but do not waste too much either as you will be cutting the excess off.4.Apply the wrap and avoid bubbles by doing it patiently or use a card/squeegee to streak out the bubble if needed.Use a hair dryer or heat gun for areas of awkward shape.The heat will cause the vinyl to soften and flex better. Use your fingers or same tool to push in any indents you want to show up.5.Use a stanley knife to cut off the edges，holes etc to get the desires looks.