Material: 304 Stainless Steel. Long using life.
M4:Diameter-4mm,Screw Length-10mm,Head Diameter-6.5mm,Head Height-2.2mm
M6:Diameter-6mm,Screw Length-20mm,Head Diameter-9.8mm,Head Height-3.4mm
M8:Diameter-8mm,Screw Length-20mm,Head Diameter-13mm,Head Height-4.5mm
Package included:4 x M4 10mm screws,4 x M6 20mm screws,4 x M8 20mm screws

Technical Details

Product Details

Package Dimensions
Width : 3.35 inch
Height : 1.57 inch
Length : 5.79 inch

Shipping Weight: 2.88 ounce (View shipping rates and policies)

ASIN : B06XCHL34L

Product Description

Package included:
4 x M4 10mm screws
4 x M6 20mm screws
4 x M8 20mm screws
It is quite important that the correct screws are used to attach wall mount units to the backs of flat panel TVs. If the fasteners are not the correct pitch the threads might strip out and then the TV could fall after installation. The screw length is also important. Screws that are too short may not have enough grip and could fail. Screws that are too long will bottom out before tightening up. If you try to force them you could strip them or damage internal parts.
To help eliminate problems during mounting TVs to wall units, an industry-wide group was formed named VESA (Video Electronics Standards Association). Most TV manufacturers comply with the standards established by VESA. If you look at the back of your TV you will notice that the screws holes are in a perfect square pattern. When you measure the distance between holes they should be as follows:
To help eliminate problems during mounting TVs to wall units, an industry-wide group was formed named VESA (Video Electronics Standards Association). Most TV manufacturers comply with the standards established by VESA. If you look at the back of your TV you will notice that the screws holes are in a perfect square pattern. When you measure the distance between holes they should be as follows:
VESA 75 measures 75 mm x 75 mm (approx. 3''x 3'')
Uses M4 (Small) screws
VESA 100 measures 100 mm x 100 mm (approx. 4'' x 4'')
Uses M4 (Small) screws
VESA 100/200 measures 100 mm x 200 mm (approx. 4'' x 8'')
Uses M4 (Small) screws
VESA 200 measures 200 mm x 200 mm (approx. 8''x 8'')
Uses M6 (Medium) screws
VESA 400 measures 400 mm x 400 mm (approx. 16''x 16'')
Uses M8 (Large) screws