USD 26.88/set

USD 25.88/set

USD 15.66-19.28/set

USD 17.69-18.19/set

USD 23.59/set

USD 14.98/set

FPV 5.8Ghz 600mW 48 Channels Wireless A/V transmitter and receiver TS832+RC832 plus Tx & Rx Set for aircraft 5KM range

Description:

Boscam has forged a reputation of quality and reliability and has been tested and developed by FPV pilots for FPV pilots.

The TS832 Transmitter packs a whopping 600mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The TS832 is transmitting a full range of 32 channels and uses an easy to use 2 button interface it also comes with a clean pre-wired harness and only weighs in at a scant 21g it’s Perfect for a wide range of aircraft!

The RC832 Receiver is nice and small in size for easy integration into your ground station but big in quality and features. The receiver uses the same two button interface as the TS832 Transmitter making channel swapping a breeze. There are two independent AV outputs for both audio and video. So you can use a monitor and set of goggles or maybe a DVR to record your flight for when your significant other asks where you were for the last 4 hours. Powering the receiver at the field is as easy as plugging in a 3 cell lipoly into the included prewired cable with mini JST. It just doesn’t get any simpler than this.

*For best range and video link stability we recommend using the Boscam 5.8GHz Cloud Spirit circular-polarized Antenna Set (SMA-RP) available below in the accessory’s tab

Features:
? 40 channels: Cover A B E bands and F bands
? Two switching buttons for the band and channel
? Two digits display for the band and channel
? Power off memory for last channel and band
? dual Independent video and audio signal outputs

Specs:
Video format supported: NTSC/PAL
Antenna connection: RP-SMA jack (module side both TX and RX)

Transmitter TX TS832 specs:
Power input: 7.4-16V (3S Lipoly suggested)
Transmitting power: 600mW
Antenna gain: 2dbm
Working current: 220mA at 12V
Video bandwidth: 8Mhz
Audio bandwidth : 6.5Mhz
Weight: 21g
Dimension: 54x 32x 10mm(excluding antenna)

Receiver RX RC832 specs:
Power input: 12V
Working current: 200mA max
Antenna impedance: 50Ω
Antenna gain: 2db
Rx sensitivity -90dBm
Video impedance: 75Ω
Video format: NTSC/PAL auto
Dimension: 80x 65 x15mm
Weight: 85g

Frequency range:
FR1 5865 5845 5825 5805 5785 5765 5745 5725
FR2 5733 5752 5771 5790 5809 5828 5847 5866
FR3 5707 5685 5665 5645 5885 5905 5925 5945
FR4 5740 5760 5780 5800 5820 5840 5860 5880

7inch LCD TFT FPV 1024 x 600 Monitor:

Designed specially for FPV and outdoor operation purpose. The monitor has very bright image(adjustable) and very wide power supply range(7-12V).The monitor also has a very important feature for FPV users. It doesn't have "blue screen" problem when the signal gets weak. This feature makes you able to fly much further and never lose image. When VTX is not connected it just show static.

Note:The default display mode is PAL if you use NTSC cam or other format please choose it in the menu to get the most suitable view on the monitor.

Supported video format: NTSC M PAL M NTSC BG PAL N NTSC DK PAL DK PAL I and SECAM BG.

Features:

?Ultra Bright 500 CD/M⊃2; High-Definition Display

?Supports Composite Video RCA Input

?Display Resolution up to 1024*600 Pixels

?16:9 or 4:3 Adjustable Display Ratio

Designed for FPV Application

Application to FPV or Wireless Composite Video Camera in making Movies.

Specifications:

Panel Size: 7" widescreen

Brightness: 500 CD/M⊃2;

LCD Type: TFT LCD

Resolution: 1024 x 600

Aspect Ratio: 16:9 & 4:3

Contrast Ratio: 500:1

Light Source: LED Backlight

Surface Treatment: Anti-Glare

Viewing Angle: 70°/70° 50°/70° (L/R U/D)

Inputs: Compostie 2 Video RCA Input

Input Voltage: DC 7.4~35V (suggest 3S battery)

Input Current: DC 0.5A-1.5A

Power Consumption: ?8W Watts

Storage Temperature: -20°C to 70°C

Operating Temperature: -10°C to 60°C

700TVL Camera w/ 2.8mm wide angle lens for FPV Race RC Quad Drone

Description:

It comes preconfigured for any FPV flying condition with a 2.8mm wide angle lens.

Since FPV cameras tend to be the "first point of impact" we have additionally added water resistance into the design.

Features

"Zero" latency (less than 1ms end to end)

700 TVL - the highest possible resolution without adding additional latency

Tuned both for day and night flying

2.8mm wide angle lens

Lightweight plastic enclosure matching popular older cameras for mounting compatibility

Wide voltage input range (7.5V--13V)

Spec

Lens: 2.8mm

Model: PAL

Weight: 11g

L shape inner hle antenna 5.8G clover Mushrooms RP-SMA antenna set:

Description:

A brand new design 5.8 G Antenna gains for FPV aerial photo. All the products have a strict test the standing-wave ratio is lower than 1.5. This is exactly the first choice for FPV and it can effectively expand the launch distance and angle.

The blue part can bend.

GGSM: 5.72G 5.74G

L shape inner hole

Specifications:

Function: RC FPV high-gain antenna

For Vehicle Type: RC Airplanes RC Helicopters

Color: White

Material: Alumium Plastic

Packages Including:

1 x TS832 transmitter

1 x RC832 receiver (after you pay send RC832 plus for you)

2 x 5.8G 5DB antenna

3 x cable

1x 7" monitor with shell

1x 700TVL camera

2x antenna with inner hole

1x XT60 male to T plug female connector

Note: if you have any question or problem after you receive the parcel please kindly contact with me firstly I am a good and honest seller surely can solve well for you do not leave us the negative feedback thanks.