24V Micro DC Submersible Pump Waterproof Power Saving High Temperature Absolute Mute For Home Appliance Medical Use Industry etc

 

 

Mute (Very Low Noise)

Surprisingly Powerful in so small size

Power Saving with just 20W

Can be used for High Temperature fluids pumping when land use

 

JT800A-24V-spray015

pic-0006-20130109

This is our latest brushless DC pump product， ceramic shaft and ceramic sleeve， more muted. The consecutive life expectancy of can be over 100，000 hours. Amphibious 2 use. Non-self-priming， water should be able actively flow into inlet of pump at land use connecting with outside pipe. Long time work without fluids inside pump can be damagable.

JT-800A-1
Typical features:
Operating voltage :6-24V (voltage more than 24V is not advised)， current 850mA at 24Vdc， Max static head 4.2 meters， Max horizontal flow 1100L / H. (Ultra power saving)
Materials: Pump body with high-temperature-proof plastic material. The sleeve and shaft with high-strength ceramics. (Note: usually common pump only with the ceramic shaft， without ceramic sleeve)
Structure: with four suction cups on the bottom， can be arbitrarily fixed on a smooth surface.
Power cord: diameter 3.0MM waterproof round wire length of 2 meters and waterproof connector.
Product size: 80 * 46 * 58 (H) MM (including water inlet and outlet)
Pump outlet diameter: 1/2 inch threaded， OD 20MM， ID12MM
Pump inlet diameter: 1/2 inch threaded， OD 20MM， ID 12MM (plus 2 waterproof gaskets).
Suitable medium: water， oil， and other acid-base solution. (Land use when pumping acidic liquids， submersible installation is not advised at this case)
Max Operating Temperature: resistance to high temperature of 100 degrees. Pumps can dive at room temperature， land use at high temperature(>75C). (Pump body material itself can be resistant to 200 degree Celsuis)
Useages: refrigeration system， water circulation system， the solar collector circulation system， the solar temperature circulation system， hot water pipe circulation system (to get instant hot water when opening)， solar water-warming mattress， floor heating， fountains， etc.
For Wire， Brown is Positive， Blue is Negative. 

pic-0009-20130109pic-0010-20130109pic-0081-20130109pic-0134-20130109

pump can cling to the wall

Dimension:

JT-800A-dimension

Head-Flow Rate-Voltage Curve: (can be customized for bulk demands)

JT-800A-curve-24V

 

How to Choose pump:

1. Make sure the working voltage， current， head and flow. The Max head means the static head. The pump can lift to the max heightwhen there is no flow. If you want special flow at special height， you must choose more higher head than the height you want to pump.

2. Make sure the dimension(threaded interface or not， the direction and diameter of outlet and inlet).

3. Working environment(temperature and medium).

4. Other functional requirements， such as time control， motion control， pressure control， flow control， and speed adjustment.

 

Note:

1. Working at rated voltage. The positive pole isred wire， the negative pole is black wire.

2. This pump is centrifugal pump， it can\'t vent the air automatically， so it must be operated by submersible installation.(if outside water installation， you should make sure it is installed blow the liquid surface)

3. When blocking， long-running is not allowed.

4. Preventing any hard particles entering the pumps.

 

about_shopping-1125

about_shipping-1125

about_return-1125

about_shysky-1125

 

';