- input (3.7V ~ 34V)? output (3.7V ~ 34V) between any adjustments? the current in the same volume of DC-DC circuit? very few can achieve such a high voltage.
- Maximum input current 3A? 2A current recommended in the following? leaving a certain margin. Power up to 15W or so? up to about 90% efficiency.
Note:
- Use heavy gauge wire to connect the circuit. Clockwise decreases the voltage? the voltage increases counterclockwise.
- positive and negative input and output can not be reversed? the output is not short-circuit.
- The output voltage must be limited to 35V or less? otherwise it will damage the circuit.
- connect the input power? and then adjust the voltage to their needs. Finally? draw a line load!
- As the step-up DC-DC circuit? the input voltage is lower than the output voltage. In order to ensure stable output voltage.
- as close as possible the input and output voltage? input voltage * Input Current efficiency = output voltage * Output current. The closer the input and output voltage output current greater!
3)Note: This can not be used for notebook? laptop at least 60W of power.
