Category 6 UTP copper cable meets ANSI/TIA-568-C.2Category 6 and ISO 11801 2nd Edition Class E channelstandards. The conductors are 24 AWG copper insulatedwith HDPE polymer. The copper conductors are twistedin pairs, separated by a cross divider and covered by a lowsmoke zero halogen or flame retardant PVC (CM or CMR)jacket.Technical InformationElectrical performance: Certified performance in a 4-connector configuration up to 100 meters,meets ANSI/TIA-568-C.2 Category 6 and ISO 11801 2nd EditionClass E channel requirementsConductor/insulator: 24 AWG solid copper insulated with HDPE polymerFlame rating: LSZH-1: IEC 60332-1, 60754-1, 60754-2, 61034-2,EN50575: Euroclass Dca ・s2, d2, a1LSZH-3: IEC 60332-3, 60754-1, 60754-2, 61034-2EN50575: Euroclass Dca-s1a, d2, a1CM: UL 1685, EN 50575: Euroclass EcaCMR: UL 1666PoE compliance: Meets IEEE 802.3af and IEEE 802.3at for PoE applicationsInstallation tension: 110N (25 lbf.) maximumTemperature rating: 0ｰ to 50ｰC (32ｰ to 122ｰF) during installation-20ｰ to 60ｰC (14ｰ to 140ｰF) during operationCable jacket: LSZH ・Low Smoke Zero HalogenCM ・PVCCMR ・Flame retardant PVCCable diameter: 5.6mm (0.222 in.) nominalCable weight: LSZH ・12.5 kg/305m (27 lbs./1000 ft.)CM ・12 kg/305m (26 lbs./1000 ft.)CMR ・13 kg/305m (28 lbs./1000 ft.)Packaging: 305m (1000 ft.) easy-pay-out boxLSZH ・14.5 kg/305m (30 lbs./1000 ft.)PVC (CM) ・14 kg/305m (29 lbs./1000 ft.)PVC (CMR) ・15 kg/305m (31 lbs./1000 ft.)Packaged tested to ISTA procedure 1At