Description
<br />* 2.4GHZ wireless A/V transmission
<br />* 4.3-inch TFT LCD screen
<br />* 4 LED DAY Night Vision car rear view camera
<br />* Easy installation for DIY usage
<br />* Real-time rear view while Parking
<br />
<br />Reversing camera
<br />
<br />image device  1/3 3030 CCD colour 
<br />4led night vision
<br />TV system PAL or NTSC 
<br />Resolution 420 TV lines 
<br />Electric Shutter  PAL:625Lines.25Field /sec NTSC   :720Lines.25Field/sec 
<br />Effective pixels PAL: 720X 576  NTSC: 720X 480 
<br />Minimum illumination 0.3Lux 
<br />Viewing angle 120  
<br />S/N ratio >48dB (AGC-OFF) 
<br />Video output RCA connector,  1.0vp-p, 75ohm 
<br />Current consumption  120mA 
<br />Power supply DC8V-12V 
<br />Operating temperature -30 to 65  degrees centigrade,  RH95% Max. 
<br />Storage temperature -35 to 70  degrees centigrade, RH95%  Max. 
<br />Other items automatic white  balance, AGC and BLC 
<br />Water-proof Yes, to IP68  standard 
<br />(Distance reference marking display)
<br />
<br />LCD Monitor
<br />
<br />2-channel video input(Yellow & White, Auto switching)
<br />12V Power Input
<br />Easy installation without damaging to any parts of the car
<br />With menu buttons, you can adjust brightness, saturation, contrast, hue, etc.
<br />Small and lightweight enough that you can carry it everywhere for instant video play: CCTV camera or even video games
<br />
<br />Manufacture Specification:
<br />Screen Size: 4.3 inch HD digital TFT LCD (LED)
<br />Resolution: 480 (W)*RGB*272(H)
<br />Color Display: Yes - RGB
<br />Video System: AUTO NTSC/PAL
<br />Power Cable Length: 120cm
<br />
<br />wireless kit
<br />*Take one minute get your camera become a wireless camera
<br />*Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)
<br />*Work Range:Up to about 50m(Hollowness)
<br />*Connects to rear-view camera and front video screen
<br />*Fit all RCA composite video connections
<br />*Power: DC 12V
<br />*Transmitter/Receiver Cable Length:1.5m
<br />
<br />How to Install a Camera with the Wireless Module:
<br />Take out your stock license plate light at the back of your car.  
<br />Fix the camera to where the stock license plate light was.  
<br />Connect the built-in  license plate light of the camera to where the stock  license plate light was connected to get the power  
<br />Connect the  transmitter to your camera via the two cables - yellow plug for AV output and red plug for power
<br />Connect the transmitter to the reverse light of your car to get the power - red wire for positive and black wire for negative
<br />Connect the receiver to your car monitor's yellow plug for AV input.
<br />Connect the receiver to your car reverse control wire (by gearbox reverse switch 12v) - red wire for positive and black wire for negative
<br />You will see the images when your reverse car.
<br />when completed reverse,the monitor will turn off or automtically turn for the previous video input such as your car dvd player
<br />Please do not mixup which one is receive,which one is transmitter,Or it will not work
<br />
<br />* 1 x 4 LED Car Rearview Camera (12V )
<br />* 1 x 4.3" Car LCD Folding monitor
<br />* 1 x DC cable for monitor
<br />* 1 x wireless Transmitter 
<br />* 1 x wireless Receiver