施工方法：
1.首先将基本底材磨平，用湿毛巾搽干净被贴面的灰尘或污垢。
2.将产品裁好需要的尺寸，从膜的角位上撕开底纸约5-10公分，手持刮板或干布从上往下按顺序一步一步粘贴，在粘贴过程中注意避免留有气泡，若有气泡务必压出或用针尖刺破挤出。
3.本产品可弯曲贴合，用电热工具加温，适当用力拉伸，并以此用抹布压平即可。
4.如有任何不明之处，可随时联系客服，谢谢！
签收说明：
1.签收快递时请务必检查好外包装是否完好，如有破损请不要签收，尽快联系我们的客服处理！
2.如若签收破损的快递件，损失由买家承担，请务必认真检查。Construction method:
1. First， the basic substrate polished with a wet towel was clean and paint dust or dirt veneer.
2. Insert the CD you need product size， torn paper from the bottom corner of the film about 5-10 centimeters， hand scraper or dry cloth from the top step by step in order to paste， paste in the process of taking care to avoid leaving bubble， if the bubble sure to press out or punctured with a needle out.
3. This product can be bent lamination， heating with electric tools， appropriate stretching force， and thus can be flattened with a cloth.
4. If any of the unknown， you can feel free to contact customer service， thank you!
Sign Description:
1. Be sure to check good sign for delivery packaging is intact， if damaged please do not sign， contact our customer service as soon as possible!
2. Should the receipt of the courier damaged items， the loss borne by the buyer， be sure to carefully check.