The Portable Car Jump Starter is a convenient and powerful device that combines 3 different products: a battery charger， a car jump starter， and an LED flash light altogether into one compact design that can easily fit inside your pocket， the glove box inside the vehicle， or carry bag for travel. It’s also a portable power bank battery chargers.

Features:
It’s a Jump Starter – quickly jump starts a dead battery of 12V car just in seconds.
Portable battery charger with charging adapters for all major electronic devices.
High Capacity Lithium Polymer battery power pack: 12000mAh.
Only takes 1 hour for a smart phone to be fully charged.
Compact car jump starter that can jump start your car 20 times on a full charge.
Use of the most stable Linear Chipset.
With a built-in LED emergency light，ultra-bright LED flash light， strobe light， and SOS signal light that lasts 120 hours.
Built-in protection features: over current protection; short circuit protection; overload protection; over-voltage protection; over-charge protection.
Portable compact design that will easily fit in your pocket， backpack， or glove box for convenience.
This product is used to activate gasoline vehicles of 3.5 liter or less.
Also suitable for Gasoline Automobile， Motorcycle， Jet Boat， Jet Motorcycle.

Specifications:

Capacity	12000mAh(44.4Wh)
Battery type	LiCoO( lithium cobalt oxide)
Two USB Output	5V/2.1A    5V/1A
Starting current	200A
Peak current	400A
LED Mode	Normal，Strobe，SOS
Full charging time	Approx 3 hours
Color	Red and Black
Operating temperature	-20~85  ℃
Life Cycle	1000 times
Protection circuit	over-charge，over-discharge，anti-reversing charging protection
Product size	165*75*30mm（L * W * H）/ 6.5 * 3.0 * 1.2in
Product weight	359g / 0.79lb
Package size	28.0 * 23.5 * 5.5cm / 11.0 * 9.3 * 2.2in
Package weight	999g / 2.20lb

How to Jump Start a Dead Car Battery? 
1.Connect the jump start cable to the dead battery of the Car. The RED clamp to the positive “+” terminal and the BLACK clamp to the negative “-” terminal.
2.Connect the jump start cable to the jumpstart socket of LIPOWER T6.
3. Press the On/Off button of LIPOWE T6 until the blue battery light indicator is ON .
4. Now attempt to crank start the engine.
5.After the engine’s started successfully， remove the jump start cable.


Package list:
1 * Jump Starter Device
1 * Car charger
1 * AC Adaptor
1 * Jump Starter booster cable
1 * User Manual(English)
1 * Case