Item Descriptions:

size:

46 - 65 inches correspondence (wide)

| Color:

black

For LCD TV only!

Television Wall Mount Bracket

Ultra thin metal fittings of 22 mm which realize a beautiful finish

[Item point]

- Excellent finish with thinness of 2.2 cm

· Satisfaction No. 1 as it is finished thin!

· If the back of the TV is flat and there are 4 screw holes, it is suitable for most television.

Flexible installation location

Since the width of the base plate is longer than the size of L, the flexibility of installation site will benefit!

* Please consider using gypsum board anchor etc as auxiliary.

【Points of installation】

A long screwdriver is required when tightening the safety lock bolt.

You should prepare in advance.

Japanese manual and necessary screws are all included

【Installation method】

① Attach the monitor bracket to the back of the TV

② Install the base plate

③ Hook the monitor bracket to the base plate and fix it

It can be attached to two studs

Whether the stud interval is 406 mm (inch module), 45 mm (scale module), 500 mm (meter module), it can be firmly attached to two studs.

Wiring caution ①

When you hang a TV on a slim-type bracket, care should be taken on the wiring because the clearance on the back of the TV and the wall becomes very narrow.

Side wiring / downward wiring is advantageous for slim installation.

Attention to wiring ②

If you are inserting a straight cord into the back of the TV, you can use the spacer attached to the product to widen the gap with the wall or use the L-shaped plug to suppress the crowding of the code.

Be sure to check before purchasing!

[Full-fledged vibration test implementation]

One of the things that customers are worried about when hanging on TV is "earthquake resistance".

In this product, vibration waveform inspection which reproduces the seismic waveform of seismic intensity 7 observed at the time of the Great East Japan great earthquake as much as possible is carried out,

In order to communicate as much security as possible to everyone, we really do genuine safety inspections from the customer's point of view.

[Relief goods that you can rest assured]

If you can not install it even though it meets the following conditions, we will respond to returned items.

· Threaded holes on the back of the monitor

· Removable stand (television with built-in stand is rare)

· The back of the monitor must be flat

· Monitor size is 46 to 65 inches

· The weight of the monitor is 45 kg or less

· The distance between the screw holes on the back of the monitor is within the range of "length: 75 mm to 400 mm width: 75 mm to 800 mm"

Features:

• Please enter model number Confirm this is compatible:
• 【Product Features】 Wide baseplate to be attached to the wall.
• TV Setter Slim 1 L Size Wide.
• 【Contents of contents】 TV setter body | Mounting screw set | Clear installation instructions
• [Product specifications] General purpose type | Applicable inch: 46 to 65 inches | adaptation weight: up to 45 kg supported | body weight: 2.0 kg.
• For details on dimensions, please see the image at the top.
• 【Reliable Returns】 It is a safe returnable product with a 3 year warranty.
• For details, please refer to our "Returns and refunds" column.
• [Corresponding number of inches] 46 inches 47 inches 48 inches 49 inches 50 inches 51 inches 52 inches 53 inches 54 inches 55 inches 56 inches 57 inches 58 inches 59 inches 60 inches 61 inches 62 inches 63 inches 64 inches 65 inches
• 【About STARPLATINUM】 It is a specialized shop of TV wall hanging metal fittings, ceiling hanger metal stand, DIY.
• Such as SHARP "AQUOS", Toshiba "REGZA", HITACHI "Wooo World", Mitsubishi "REAL", PANASONIC "VIERA", Sony "BRAVIA (BRAVIA)", LG Electronics "OLED"
• We deal abundantly with TV fittings that correspond to any TV maker.

Product information:

Shipping Weight: 4000 g

Package Dimensions: 3.20 x 15.70 x 86.51 cm