Item Descriptions:

You can enjoy the tablet function comfortably by installing the tablet holder.

In-Vehicle Holder Mount for Tablet Mount Mounting Type 360 ​​degrees can be rotated.

Tablet etc. Fitness bike · exercise bike

Can be fixed to.

Motorcycle Bike Although it is possible to mount also on bicycles and the like, there is a risk of falling off loaded items during use.

※ Compatible models: Nexus 7, ipad mini, iPhone 7 7plus 6s 6 6s plus 6plus can be installed, of course, but it can correspond to various sizes such as iPhone, ipad mini smart phone such as smart phone shape and so on.

Equipment compatible Size: Width of about 6.7 cm to 14 cm Corresponding thickness up to about 12 mm Corresponding body weight: about 120 g

Bar handle can be mounted to a diameter of about 20 mm to 31.75 mm

The main body can rotate 360 ​​degrees.

Since the screw type joint is mounted on the mount, it is adjustable to an angle that is easy to see up, down, left and right.

Fitness bike · Exercise bike etc. for tablet terminals etc

Can be fixed to.

In case

As the measures to prevent the mount and the tablet holder from falling off due to vibration or the like are becoming hard to fit, it is possible to fix it after inserting the mount and the tablet holder and further pushing it in until it pushes it all the way in.

In case

Motorcycles, bicycles, etc. can also be installed, but there is a risk of falling off the mounted items during use.

In case

If you are using motorcycles, bicycles, etc. please install it in a location with low wind pressure.

In case

It is a plastic product so it will be damaged by excessive wind pressure.

In case

In regards to handling with motorcycles etc, please be careful enough at purchaser's own responsibility.

In case

This product is not a product that guarantees sufficient fixation.

In case

Depending on the usage situation, the mounted items drop off.

In case

We recommend that you take measures to prevent falling of mounted equipment separately.

In case

Those who wish to fix enough please prepare screws, bonds, rubber etc for customers and fix them.

In case

Depending on the handle diameter there are things that can not be installed.

In case

Please be sure to purchase from confirming the size of your hand navigation and tablet etc.

In case

Image tablets etc are not included.

In case

Because it is not heat resistant specification, there is a possibility of dropout of the mounted item depending on the usage situation.

Avoid using it in a place exposed to direct sunlight.

It may cause cracks, warping, etc.

Features:

• In-Vehicle Holder Mount for Tablet Mount Mounting Type 360 ​​degrees can be rotated.
• You can fix tablets etc to fitness bike · exercise bike etc.
• Motorcycle Bike Although it is possible to mount also on bicycles and the like, there is a risk of falling off loaded items during use.
• ※ Compatible models: Nexus 7, ipad mini, iPhone 8 8plus X 7 7s 7plus 6 6s 6plus can be installed of course, but it can correspond to various sizes such as iPhone, ipad mini smartphone such as Smartphone smart phone shape and so on.
• Equipment compatible Size: Width of about 6.7 cm to 14 cm Corresponding thickness up to about 12 mm Corresponding body weight: about 120 g
• Bar handle can be mounted to a diameter of about 20 mm to 31.75 mm
• The main body can rotate 360 ​​degrees.
• Since the screw type joint is mounted on the mount, it is adjustable to an angle that is easy to see up, down, left and right.
• With a falling-off band rubber 1 piece (Please devise to use for fall prevention etc.) Instruction manual will be attached.

Product information:

Shipping Weight: 204 g

Package Dimensions: 8.41 x 16.00 x 24.31 cm