Description

 

wifi 327 can be used on Iphone,Ipad and so on...

 

Wifi OBD VGATE Technical Specifications

 

SSID: CLKDevices

IP: 192.168.0.10

Subnet: 255.255.255.0

Port: 35000

Range: 50 ft (Line of sight)

Antenna: Internal

Power Consumption: 0.75 Watts (With Power Switch)

Wifi Standard: 802.11a/b/g

Operating Temperature: -15 to 100 Deg Celsius

Plastic: Automotive Grade

Physical Dimensions: 2.75 x 1.25 x 1.2 inches

 

Features:

 

CLK is capable of communicating with vehicles which adopt following protocols:

ISO 9141

ISO 11898(aka. CAN)

ISO 14230(aka. KWP2000)

ISO 15765(aka. CAN)

SAE J1939

 

WI-FI OBD AUTO CHECKER is able to detect and interpret these protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with WI-FI OBD AUTO CHECKER. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained.

 

WI-FI OBD AUTO CHECKER is measuring only 2.7 x 1.25x 0.9 inches.It comes included with a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles. Connecting to your iPhone / iPod touch /iPad is made by WIFI connection in adHoc mode.

 

Elder OBD compatible vehicles has a sticker indicates that the vehicle is OBD compatible. Model year 1996 and newer vehicles are compliant by default, and will not have this sticker.

 

Following are Some of The Parameters Which Could be Read From the Vehicle:

 

Vehicle Speed

RPM

Fuel Consumption*

Engine Coolant Temp

Fuel Pressure

Calculated Engine Load

Throttle Position

Intake Manifold Pressure

Air Intake Temp

Timing Advance

Mass Air Flow

Fuel Level

Barometric Pressure

EVAP System Vapor Pressure

Fuel Trim

 

  • Power Control provides a very low power standby mode

  • More J1939 support

  • A non-volatile memory location for storing user data

  • An option to turn off the CAN silent monitoring for bench testing, or when connecting to a dedicated CAN port

  • CAN extended addressing support for experimenting with special data formats

  • The ISO/KWP bus initializations may now be performed without having to send a request

  • A 4800 baud ISO option, to compliment the 10400 and 9600 rates

  • An SS command for searching sequentially through the protocols

  • A TA command to change the Tester Address without using a PP

  • The ability to quickly restore the factory calibration for the voltage reading circuit


  •  

In addition, there have been several improvements made 'under the hood', which will help with the overall reliabilty. Download either the 'QuickSheet' (a 7 page summary), or the full (76 page) Data Sheet for a more complete description of what it is now capable of. We are often asked about the differences between versions of the ELM327, as it has been updated several times. The AT Commands file provides a summary of these

Overview:  

ELM327 Bluetooth CAN-BUS scan tool supports OBD-II protocols. It is used to read & diagnose trouble codes, clear trouble codes and detect fuel pressure and so on.

 

Features: 

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

  Clear trouble codes and turn off the MIL ("Check Engine" light).

  Display current sensor data, including:

   Engine RPM

* Calculated Load Value

 * Coolant Temperature

 * Fuel System Status

 * Vehicle Speed

 * Short Term Fuel Trim

 * Long Term Fuel Trim

 * Intake Manifold Pressure

 * Timing Advance

 * Intake Air Temperature

 * Air Flow Rate

 * Absolute Throttle Position

 * Oxygen sensor voltages/associated short term fuel trims

 * Fuel System status

 * Fuel Pressure

  Specifications:

 

Support OBD-II protocols as follows:

  * ISO15765-4 (CAN)

  * ISO14230-4 (KWP2000)

  * ISO9141-2

  * J1850 VPW

  * J1850 PWM

 

Dimensions: 7 * 4.5 * 2.5cm

 

 Net weight: 43g

  Total weight: 50g

 

 Compatibility:

  * Works on all OBD2 Vehicles ( from 1996 in USA) and EOBD vehicles ( Petrol cars from 2001 and diesel cars from 2003/2004 in Europe)

 

 * Compatible with Android Torque and Windows Smartphone, Windows PC.

Packing List:

 

1 * ELM327 unit (Bluetooth version)

1 * CD drive

 

Tested Compatible vehicles:

 

Benz2001/02/03W203 C200K  AND 99% MAKE AFTER 2000 BENZ(ISO)

BMW E46,E39,E60 AND 99% MAKE AFTER 1999 BMW   (ISO)

 

 Chevrolet Aveo (ISO)

Citroen C3 2004 (ISO) ? Daihatsu YRV 2005 (ISO)

Daihatsu YRV Turbo 2006 (ISO)

Fiat Tipo 2002 (ISO) 

Ford New Focus 2006(CAN)


99% HONDA MAKE AFTER 2001 CAN SUPPORT

Honda Accord 2006 JDM (ISO)

Honda Accord Euro R 2004 JDM (ISO)

Honda City GD8 (ISO)

Honda Civic ES 1.6A (ISO)

Honda City Vtec

Honda Insight

Honda Integra Type R DC5 JDM (ISO)

Honda Jazz 1.4M (ISO)

Hyundai Accent 2004 (ISO)

Hyundai Getz 1.3A 2004 (ISO)

Hyundai Getz 1.6M 2004 (ISO)

Hyundai Matrix 2004 (ISO)

Hyundai Accent

HyundaiSanta Fe2.4A (ISO)

Hyundai Sonata GLS (ISO)

Hyundai Sonata 2005 (ISO)

Hyundai Tuscani FX (ISO)

Kia Carens 2005 (ISO)

Kia Magentis 2005 (ISO)

KiaRioLS (ISO)

Kia Sorento SUV 2005 (ISO)

Lexus es300 Mazda 2 (CAN)

Mazda 5 (CAN)

Mazda 6 (CAN)

Mazda Premacy 2001 (ISO)

Mazda RX8 (CAN)

Mitsubishi Colt 2003 (ISO)

Mitsubishi Colt Plus 2005 (ISO)

Mitsubishi    4G93 GDI (ISO)

Mitsubishi Eclipse(GST-----Turbo Car can be tested for the year 1995-2000;RS/GS----1994-1996 GS all can do;Turbo Car for the year 1996-2000,only have speed and TPS,can clear the DTCS)

Mitsubishi Lancer Evolution IX 2006 (ISO)

Mitsubishi Pajero 3.5 V6 2006 (ISO)

Nissan Sunny B14 (ISO)

Nissan Sunny VIP FB15 (ISO)

Nissan X-Trail 2.0L 2004 (ISO)

Nissan X-Trail 2.5L 2004 (ISO)

Peugeot 206 2001 –Only can show RPM

Peugeot 206 (ISO)

Peugeot 307 (ISO)

Peugeot 407 (ISO)

 

Proton Inspira 2011 1.8/2.0

Proton Savvy 2008 1.2 AMT 

Proton Exora Bold CFE

Proton Persona Elegance

Proton Preve 2012

Proton Waja 1.8

 Renault Megane II 2005 (ISO)

Renault Kangoo 2006 (ISO)

Subaru Impreza 1.6TS 2002 (ISO)

Subaru Impreza WRX 2005 (ISO)

ToyotaCamry 2.0A 2004 (ISO)

ToyotaCamry 2.4A 2005 (ISO)

ToyotaCorolla Altis 1.6A 2005 (ISO)

ToyotaCorolla GLXi G8 1999 (ISO)

ToyotaCorolla G9 2002 (ISO)

ToyotaVios 2004 (ISO)

Chevrolet Cruze 

Other tested compatible vehicle list can be viewed here: 

 

Not available vehicles:

Nissan Sunny (N16)

Nissan Cefiro (Teana) 2005

Proton Perdana V6

Proton Saga

Proton Wira

Perodua Myvi

Perodua Alza

Subaru Legacy GT 2005

Toyotacamry 2002

ToyotaWish JDM (Missing Pin 5 in DLC)

ToyotaIST JDM (Missing Pin 5 in DLC

 PLS CHECK THE LATEST CAR MODEL VIA LINK BELOW

 http://www.2shared.com/file/ksAU9zOE/OBDII_scantool_usage_statistic.html

 Package:1 x ELM327 WiFi Wireless OBD2 Interface

1 x Software CD