Description:
Fixed eight on-time selection.
Maximum watering time 99 minutes, the shortest time of 1 minute watering.
24 Hour cycle also can be realized for each different watering time.
Using a 9V alkaline batteries can be used continuously for one year, is very energy efficient.
With manual work and low power battery auto-off feature.
Waterproof process design, excellent performance, safety and reliability.
Feature:
Material : ABS
Monitor : LCD
Operating voltage: DC9V alkaline battery laminate;
Static current consumption: ≤30uA;
Clock error: ≤0.6 seconds \/ day;
Suitable pressure: 0.05 ~ 0.8MPa;
Can be connected to faucets and plumbing.
Faucet: both quarter (1\/2'') and six (3\/4'') faucets must with thread
Pipes: hoses and hard tube.
Two models of hoses: quarter (1\/2'') and six (3\/4'')
The hard tube must have thread link to the timer.
Instructions:
This water timer consists by two parts. Part A is to control the circuit , part B is the valve. Pull out part A by hand to separate it. Otherwise, combine two parts.
How to use:
This timer had been set a program. Watering twice a day, one is 7 am, the other is 6 pm. The watering time is five minutes.
After install the battery and adjust time, the watering timer will be able to work. Otherwise, you can adjust a program according to the following steps:
1. Manual operation
In closed state of the valve, press the "+" key to manual operation, as shown "ON" on the left upper corner of the screen (figure 1), the timer is on the watering status, press "+" key to forced it to turn off the watering status (enter the state of automatic).
2.Clock Adjustment
In the automatic state, press "M" key once, the first two digits flashes (hours digits of the clock), press the "+" key to adjust, press the ">" key to switch to the last two digits(minutes digits of the clock), press the "+" to adjust, after the adjustment is completed, press the "M" key twice or wait 5 seconds, the timer will be automatically revert to the automatic state.
3. Timing setting
In the automatic state, press "M" key twice to enter the time setting. then show character "\u25b3" flashes in the workplace (Figure 3), press the ">" key to select, press the "+ key" to confirm, meanwhile show "00 "(Fighre. 4). Press "+" key to set watering time (0-99 minutes), press the ">" key and the '+' key repeatedly can set the 8 switch times respectively . After the setting completed, press the "M" key twice or wait 5 seconds, the timer will be automatically revert to the automatic state.
One day has 8 opening time , 7:00 , 8:00, 10:00, 12:00, 14:00, 16:00, 17:00, 18:00, can optional choose one , two ...... or