Item Descriptions:

size:

iPhone X

iPhone X glass film

◎ [Compatible models]

iPhone X

◎ [Product warranty]

When there was a problem with the glass film such as initial malfunction we will correspond by the manufacturer guarantee.

Since we will respond with responsibility, we will contact you as soon as possible but we will contact you.

◎ 【Full-Side Protection】

We have applied a 3D round-edge cut to tempered glass, making it a full-surface adsorption type glass film that can perfectly cover the curved surface of a smartphone perfectly.

◎ [Prevention of dirt]

The surface of the iPhone X glass film is painted with an oleophobic / hydrophobic coating, it is excellent in oil resistance and water repellency, and it can become beautiful simply by wiping it even if it gets dirt such as fingerprints, cosmetics, water drops.

iPhone X glass film

3D

Round edge processing】

① General protective glass

Since it does not cover the curved part of the terminal, there is a possibility of cracking or scratching, fingers touch the curved surface of the glass, and operability is poor.

② Full protective glass

Since the glass is not in close contact with the edge, the glass breaks and dust tends to collect in the gap.

There is a possibility that the floating portion of the edge may be damaged by a weak impact.

3D

Full protective glass

According to the curved surface shape of the terminal, than the unique 3D round edge processing closely adhered, the liquid crystal screen is protected over the entire surface, it becomes strong against the impact from the side, the rounded end also grips to the hand with outstanding operability

We realize the unity of time.

◎ [Smooth touch]

Smooth hand slip is realized by antifouling coating of special processing.

Even with the glass film stuck, comfortable touch operation is possible without impairing the intrinsic sensitivity of IPhone X.

iPhone X glass film

9H

hardness】

We use gorilla glass substrate material used for many smart phones, including iPhone and iPad.

Surface hardness is 9H, most of living goods can not scratch.

When it receives a big shock, it breaks the crow film and acts to absorb the shock and protect the liquid crystal screen of the main body.

◎ [High transmittance]

Using a gorilla glass substrate material, it's ultra-thin 0.26 mm, so you can maintain high transmittance for a long time, keeping the original beauty of the organic EL display on iPhone X without sacrificing it.

iPhone X glass film

◎ 【Installation procedure】

1.

Wipe off dirt adhered to the screen with alcohol paper (Wet Wipes 1).

2.

Wipe off dirt and remaining alcohol with cleaning paper (Dry Wipes 2).

3.

Remove the dust remaining on the liquid crystal part with a dust absorber.

Four.

Remove the iPhone X glass film and slowly peel off the hard release film.

(Since the mount is harder than the glass film, when peeling off the glass film from the baseboard, instead of peeling the mount from the glass film as the base point, peel off the glass film slowly from the base paper with the base paper as the base point.

Please be aware that there is a fear of breaking.

Five.

With the screen lit, adjust to the position of the hole in the speaker.

6.

When the position is decided, lightly push the iPhone X glass film and make it in close contact.

When bubbles remain, slowly push it out with a cleaning paper or fingertips.

7.

done.

* Common problem ①: There are floating around or bubbles are left inside.

Cause: The glass film does not match the screen well.

Solution: Slowly remove the glass film, align it with the position of the hole in the speaker, set the deviation within 1 mm, and place it on the screen.

* Common Problems ②: Bubbles remain in the middle of the screen and do not disappear.

Cause concerning: Dust is left or air is not well removed.

Solution: If dust is causing bubbles, slowly peel the glass film and remove the dust with the included dust removal sticker.

If the air is not well removed, peel off the glass film to the position of bubbles and push it again.

Features:

• Please enter model number Confirm this is compatible:
• 【Full-Side Protection】 We have applied 3D Round Edge Cut to Tempered Glass and become a glass film of full adsorption type which can perfectly cover the curved portion of the smartphone perfectly.
• 【High transmittance】 Because the ultra thin glass film of 0.26 mm, the transmittance of light is 99.8%, it can be reproduced without impairing the beauty of the screen of the iPhone X body, while the presence of the glass film itself is not felt,
• It gives an elegant and elegant impression.
• [High sensitivity touch] The same touch sensitivity as the iPhone X screen, it can operate smoothly.
• The surface of the glass film combines various special processing such as oil coating processing, smooth touch processing, etc. The resistance to oil, dust and fingerprints becomes very strong, and it can be wiped off easily.
• 【Gorilla glass made】 hard coated with tempered glass of hardness 9H, iPhone X glass film with 4 times stronger than ordinary PET film.
• Even when you hit a sharp object such as a key or a cutter, you can use the screen without damage.
• Even when it is damaged by any chance the fragments will not scatter in the state sticking to the film by scattering prevention processing High safety specification.
• 【Easy installation】 Adopt silicone self-adsorbing film, it can be pasted easy and beautifully by anyone by airless processing which makes bubbles hard to enter.

Product information:

Shipping Weight: 99 g

Package Dimensions: 1.19 x 10.59 x 20.60 cm