The Set Includes: (1)Professional Condenser Microphone, (1)Microphone Shock Mount, (1)Ball-type Anti-wind Foam Cap, (1)3.5mm XLR Cable
Adopts the exacting complete electronic circuit control; The microphone with a good cardioids polar pickup pattern, high output low self-noise, and the accurate reproduction of the most subtle sound, suitable especially for studios, recording studios, broadcasting stations, stage performances and computer; Absolutely fulfill the requirement for broadcasting and recording
The metal shock mount features an angle adjustment with locking knob and can effectively reduce handling noise; The ball-type anti-wind foam cap can protect microphone against wind interference and singers'' spit
The set can be widely used in homes, studios.
Note: 1. Do not drop, hit or apply strong shock to it; To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperature 2. The computer, phantom power and the Microphone stand are not included

Technical Details

Product Details

Package Dimensions
Width : 7.28 inch
Height : 3.23 inch
Length : 8.23 inch

Shipping Weight: 1.41 pounds (View shipping rates and policies)

ASIN : B06XC7GL4M

Product Description

Note:
1.Do not drop, hit or apply strong shock to it; To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperature
2.The computer, phantom power and the Microphone stand are not included
Descriptions:
Condenser Microphone:
The condenser microphone has a cardioid pick-up pattern that isolates the main sound source and minimizes background noise, highlighting the performance; Widely used in recording studios, radio, stage performances.
Usage:
1.Turn on your recording equipment and set the volume control to minimum position, then connect the phantom power to the microphone, turning on the phantom power switch, accommodate the volume control from low to high so obtained effect to your moderate level for protected the speakers or headphones from pounding to cause howling.
2.If the head of the microphone is covered by hand or brought close to the speaker, a howling sound may be generated; To prevent this, first decrease the volume, then place the microphone so that is not pointed to the speaker and that there is a sufficient distance between the microphone and speaker.
3.Microphone cartridge is sensitive and the component is precise; Do not drop, hit or apply strong shock to it to avoid damage.
Specifications:
Element: Black Electronic Condenser
Polar Pattern: Uni-directional
Frequency Response: 20Hz-18kHz
Sensitivity: -34dB±3dB(0dB=1V/Pa at 1kHz)
Output Impedance:150Ω±30%(at 1kHz)
Load Impedance: ≥1000Ω
Self Noise: 16dBA
Max.Input SPL:134dB(at 1kHz ≤ 1% T.H.D)
S/N Ratio:78dB
Electrical Current: 3mA
Phantom Power Requirement:5V or 48V
Net Weight: About 7.3oz/207g
Material: Metal
Package Contents:
1 x Professional Condenser Microphone
1 x Microphone Shock Mount
1 x Ball-type Anti-wind Foam Cap
1 x 3.5mm XLR Cable