【品名】：保险杠字母贴

【类型】：雕刻类

01款极品飞车【颜色】：黑底白字【尺寸】：长30cm*宽6.5cm
【Name】: bumper letters stickers

【Type】: carving category

01 Need for Speed 【Color】: white on black 【Size】: length 30cm * width 6.5cm

雕刻类专业汽车贴纸安装方法:

拿到贴纸，请先认清楚他的结构，是由3层组成(当然包装是不算的），转移膜、贴纸、PVC底层。揭开转移膜，贴纸应粘在转移膜上，贴纸的背面有胶粘模。
Carving professional car sticker installation method:

Get the sticker, please identify his structure, is composed of three layers (of course, packaging is not), transfer film, stickers, PVC bottom. Uncover the transfer film, the sticker should be stuck in the transfer film, adhesive stickers on the back of the mold.

A small car

一带透明转移膜的小型车贴安装方法（干贴法）:

二带透明转移膜的大型车贴安装方法（湿贴法）:

工具：毛巾洒水器皿刮板或信用卡

1. 清洁车身，在将要贴的车身部位上均匀洒水——以降低贴纸难度，方便调整位置。

2. 确定好需要贴的位置，慢慢的一边贴，一边轻轻用工具刮平，一边揭底纸。

3. 遇到门把手或防擦条要根据情况把材料割开并包入。

4. 适当调整，将图形大体位置确定无误后，用力反复刮去水和气泡，撕除透明转移膜。

5. 在车门和车缝用美工刀划一刀，向内包服帖

6. 不要让车贴和车身有任何分离或突起。

    7. 尽量让车贴里的水分干透，有条件可以适度加热烘干，根据天气情况，过一两天以后再洗车。

   Second, with a large transparent transfer film car stickers installation method (wet paste method):

   Tools: Towel Sprinkler Screed or Credit Card
    1. Clean the body, sprinkle water evenly on the body part to be attached - to reduce the difficulty of stickers, easy to adjust the position.
    2. Determine the location of a good need to paste, slowly side affixed, while gently scrape with a flat, while exposing the end of the paper.
    3. Encounter the door handle or scratch the material according to the situation to cut open and included.
    4. Proper adjustment, the general location of the figure is correct, the force Repeatedly scrape off the water and air bubbles, tear off the transparent transfer film.
    5. In the door and sewn knife with a knife to draw a knife, wrap the doctrine
    6. Do not allow car stickers and body any separation or protrusion.
    7. Try to let the car stickers in the water dry, conditional heating and drying can be moderate, according to the weather, after a day or two and then car wash.