Highly efficient and cost-effective 8 channels oscilloscope for vehicle testing; 2.4MSa/s real time sampling rate, 12bit vertical resolution; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.
Vehicle Testing:
First Diagnosis: Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition.
Ignition: primary and secondary.
Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position.
Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus.
Performer: Petrol/Diesel.
Starter and charging circuits.
Oscilloscope:
8 channels oscilloscope, 2.4MSa/s real time sampling rate.
12 bits vertical resolution, spectrum analysis function.
Programmable Generator:
8 channels programmable generator.
Can analog signals of crankshaft, camshaft etc.
Others:
USB 2.0 interface plug and play, and no need extra power supply;
More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
Software support: Windows NT, Window 2000, Windows XP, VISTA, Windows 7, Windows 8.
Specifications:
| Oscilloscope Mode | Hantek 1008B |
| Vertical System | |
| Analog Channel | 8 |
| Input Impedance | Resistance: 1M맺 |
| Input Sensitivity | 10mV/div to 5V/div |
| Input Coupling | DC |
| Resolution | 12 bits |
| Horizontal System | |
| Memory Depth | 4K |
| Max. Input | 400V (DC+AC Peak) |
| Real-Time Sampling Rate | 2.4MSa/s |
| Trigger System | |
| Time Base Range | 1ns/div to 20000s/div(1-2-5sequences) |
| Time Base Precision | ±50ppm |
| Trigger Source | CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8 |
| Trigger Mode | Edge |
| X-Y Mode | |
| X-Axis Input | CH1 |
| Y-Axis Input | CH2 |
| Cursors and Measurement | |
| Voltage Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot |
| Time Measurement | Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
| Cursors Measurement | Horizontal ,Vertical, Track, Auto Measure Modes |
| Waveform Signal Process | +,- , x,÷, FFT, Invert |
| Voltage Range | 10mV to 5V/div @ x 1 probe 100mV to 50V/div @ x 10 probe 10V to 5000V/div @ x 1000 probe 100V to 50000V/div @ x 10000 probe 200mV to 100V/div @ 20:1 |
| Current Range | 100mA to50.0A/div @ CC65(20A) 1000mA to500.0A/div @ CC65(65A) 1A to100.0A/div @ CC650(60A) 1A to200.0A/div @CC1100(100A) 10A to2000.0A/div @CC1100(1100A) |
| FFT | Rectangular, Hanning, Hamming, Blackman Window |
| Math | Addition, subtraction, multiplication, division |
| Programmable Generator | |
| Channel | 8 |
| Output Level | LVTTL |
| Frequency Range | 0-250kHz |
| Interface | USB 2.0 |
| Power | No need extra power supply |
| General | |
| Size | 185 * 150 * 27mm / 7.3 * 5.9 * 1.06in |
| Weight | 319g / 11.28oz |
| Package Size | 23 * 17 * 7.5cm / 9.05 * 6.7 * 2.95in (L * W * H) |
| Package Weight | 751g / 26.49oz |







