Production Description

\u2160.Summarization
Touch panel controller is a new high-end controller which newly developed by our company. Glass panel design looks beautiful and fashionable. It adopts high precision capacitance touch control chip， increases the touch sensitivity， reduces trigger which caused by mistake. It is used for controlling a variety of lamp whose light source is LED. For instance， point source of light，flexible light strip， panel lights etc.In addition，it can be connected convenient， use easily and other advantages.

\u2161.Technical Parameters
\u25cf working temperature: -20-60 \u2103
\u25cf supply voltage: DC12~24V
\u25cf output:2 channel(2 channel are with same effection)
\u25cf external dimension: L86 X W86 X H32 mm
\u25cf packing size: L105 X W105 X H47 mm
\u25cf net weight:108.5g
\u25cf gross weight: 170g
\u25cf static power consumption: !#!amp!*!lt;1W
\u25cf output current: !#!amp!*!lt;4A*2
\u25cf output power: 12V!#!amp!*!lt;96W， 24V!#!amp!*!lt;192W
\u25cf touch panel color: White\/Black like in the picture (pls tell us which color you want)

\u2162.Controller Instruction

On touch panel，there are total 9 key and 1 brighness ring.
I key: trun on\/off controller at any state
A key: choose mode.Total 3 modes can be choose cyclically.
B key: slow dynamic mode's speed down， 100 grade of speed.You can press it continuously .The key will be not useful until reach the slowest speed.
C key: accelerate dynamic mode's speed up 100 grade of speed. You can press it continuously .The key will be not useful until reach the slowest speed.
D key: delay shutdown.After pressing this key ，light will stop work 2 minutes later.Before light shundown， press any key or brighness ring will let delaying shutdown fail.
E key: output 25% brightness.Press this key at dynamic mode，mode will be changed to static output.It is unuseful to press this key when shutdown.
F key: output 50% brightness.Press this key at dynamic mode，mode will be changed to static output.It is unuseful to press this key when shutdown.
G key: output 75% brightness.Press this key at dynamic mode，mode will be changed to static output.It is unuseful to press this key when shutdown
H key: output 100% brightness.Press this key at dynamic mode，mode will be changed to static output.It is unuseful to press this key when shutdown

Brighness Ring:Touch this ring at any state，mode will be changed to static output.

\u2163.Installation Method
1.gently pry gaps in touch panel with !#!amp!*!ldquo;\u4e00!#!amp!*!rdquo; style screwdriver，then you can slowly remove the panel.
2. remove the cable. Pull the locking of the cable transposon， and then you can slowly remove the cable.
3.Fix the base of controller in the 86!#!amp!*!times;86 installation box (customers need to buy the installation box by themselves) on the wall with screws.
4.use your hand gently pull down the cable seat lock according to step 2， plug the cable into cable seat， press the lock， and mount the cable of panel on the base.

Remark:
1. Connect the load wire at first， following co