Flycolor Raptor 390 Tower is a highly integrated products for the fpv racing quads. It integrated 30A esc, F3 flight controller, OSD and PDB on the tower. It bring much convenience for assembling the drones, use this tower, you just need to solder the 4 motor wries to the ESC, so easy. And you can connect computer via USB on the flight controller, then can upgrade ESC software directly or adjusted the ESC settings directly.

Features:
BLHeli program, with Oneshot125, Oneshot42, Multishot, Damped Light mode
F3 flight controller, supports PPM, PWM and SBUS remote control / receiving mode
Highly integrated, 4 in 1 30a ESC, F3 flight controller, OSD and PDB, weight only 22g
Using C8051F390 MCU, pipelined 8-bit C8051 core with 50 MHz maximum operating frequency
Using dedicated 3in1 drivers, faster response, ESC maximum speed is limited to 400k eRPM
Suitable for 450mm wheelbase multirotor frame kit, especially for X-Style multicopter DIY
FC integrated OSD, 5V, 12V, and battery voltage (VBAT), to image transmitter, camera, buzzer, LED and other peripheral

Specifications:
ESC:
Con.current: 30A
Burst current: 40A
BEC: NO
Power supply: 2-4S
Firmware: BLHeli
Application: 450 multicopter
Mounting hole: 30.5 * 30.5mm

Flight Controller:
DOF: 6DOF
Operating voltage: 7-16V
Port: USB/Boot/PWM/PPM/SBUS/Camera/Video/GPS/Buzzer/ISP
Size: 36 * 36mm
Mounting hole: 30.5 * 30.5mm

Package Information:
Package size: 9 * 6.5 * 4cm / 3.5 * 2.5 * 1.6in
Package weight: 95g / 3.3oz
Brand gift box package

Package List:
1 * Flycolor 4 in 1 30A ESC
1 * F3 Flight Controller
1 * Power Supply Cable (XT60 Plug)
6 * Connecting Cable
1 * English Manual

$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$
$$