Should be placed in a dry 1 presses， clean place， do not put in the cooling device near the exit.
2 it is forbidden to put the debris on the housing， so as to avoid accidents.
3 do not contact the housing on the cover， so as not to burn.
4 card protection film is sandwiched inside sealing products， must be neat， the total thickness of not more than 0.6mm.
5 please do not use this machine easy soft plastic (such as polyethylene)， sticky， plastic material is too thin， so as not to damage the machine.
6. Do not choose the market is thin and easy to curl of the plastic film (card protecting film thickness should be in between 80mic-125mic)， so as not to affect the plastic effect.
7. Plastic please don't membrane of plastic unsealed is delivered into the plastic mouth， so prone to wrinkle or film winding in cots on until the damage to the machine.
8. The rollers if due to aging and other reasons caused by the hardened or cracking， will affect the plastic quality (such as plastic is not solid， etc.)， the need for timely replacement cots.
9. This machine is only limited to the use of indoor environment (dry)， plastic sealing machine working environment temperature requirements 5 degrees to 40 degrees， relative humidity is less than 80%.
Please strictly follow the instructions of the operation， in order to avoid inconvenience to you. (see Annex detailed rules specification)